Rockwell Automation introduces Allen-Bradley Kinetix 5100 servo drive
The Allen-Bradley Kinetix 5100 servo drive has multiple control modes available to support a range of high-speed, low-power motion control applications.
Servo2Go announces DZRALTE series of digital servo drives
The DZRALTE Series are digital servo drives that control brushed & brushless servomotors in embedded applications. These fully digital drives operate in torque, velocity, or position mode and employ Space Vector Modulation (SVM)
Applied Motion Products announces ODVA conformance for range of servo drives, stepper drives and integrated motors
ODVA conformant servo drives, stepper drives, and integrated motors perform their specific positioning, velocity and other motion control tasks while simultaneously exchanging control, I/O and diagnostic data with controllers on the EtherNet/IP network.
Rockwell Automation introduces enhancements to Kinetix 5700 servo system
The Kinetix 5700 regenerative bus supply regenerates excess energy, putting it back on the facility’s grid or making it available for plantwide use. The Kinetix 5700 large frame drive is designed for machines with large axis counts and higher power requirements. An added large-frame inverter extends the power capability up to 112 kW.
Electromate announces ADVANCED Motion Controls' FlexPro FE060-25-EM servo drive
At 1.5 x 1 x 0.6 inches (38 x 25 x 16 mm) in size, the footprint of the drive is approximately the same as two standard postage stamps. In other words, four of these drives can fit on a standard business card.
Beckhoff Automation has announced the AMP8620 supply module
With the AMP8620 supply module’s IP 65 protection rating and consistent decentralization, the entire motion system can now be mounted directly on the machine.
ADVANCED Motion Controls (AMC) releases FE060-25-EM servo drive
At 1.5 x 1 x 0.6 inches (38 x 25 x 16 mm) in size, the footprint of the drive is approximately the same as two standard postage stamps. In other words, four of these drives can fit on a standard business card.
Applied Motion Products introduces MDX Integrated Servo Motors
The MDX on-board controllers utilize the same command interfaces as external motor controllers including CANopen, RS-485, Modbus, and Ethernet connections as well as discrete I/O interfaces like pulse & direction.
JVL Industri Elektronik A/S introduces CiA402 Drive profile and synchronization for EtherCAT
The JVL EtherCAT module is equipped with two Ethernet connectors and a built-in switch, enabling line, star, tree and ring topology without any extra hardware. The JVL EtherCAT module has several LEDs, enabling technicians and operators to get a status overview.
KEB Automation introduces COMBIVERT S6 range of servo drives
The COMBIVERT S6 is suitable for a range of servo applications, including highly automated, safety-oriented machines. The drives provide motor control in real time, integrated safety functionality and are designed in a book-style format for easier mounting in control cabinets where space can be limited.
Applied Motion Products introduces SV200 Digital Servo Drives for DC-powered motion control applications.
Operating on 24, 48 or higher DC voltages (up to 60 volts DC), the SV200 Servo Drives offer performance with multiple controls to address the requirements of machine builders and OEMs, especially for multi-axis applications.
Applied Motion Products introduces TSM, SSM & TXM series of StepSERVO Integrated Motors
Using closed loop feedback and control technology, Applied Motion StepSERVO Integrated Motors create torque for acceleration in meeting faster machine cycles.
Electromate announces Sankyo Automation RollerDrive Reducers
The unit is constructed from an input shaft and a turret (output shaft) that is assembled with roller followers. Sankyo servo indexing tables provide motion, with the added capability to move medium to heavy loads.
Siemens announces FSAC frame for Sinamics V20, Profinet version of Sinamics V90
Siemens is extending its Sinamics frequency converter portfolio for standard applications Sinamics V20 to include a new frame size, the FSAC, in the voltage range 1AC (Alternating Current) 200 V to 240 V 1.1 kW to 1.5 kW.
Advanced Motion Controls introduces 6 DP-series servo drives
This power range comes with a variety of network options including EtherCAT, CANopen, POWERLINK, Modbus and more. Safe Torque Off (STO) functionality is included as a standard feature.
Servo2Go introduces Maxon EC-60 servo motor kits
Available in size ranges from 70 Watt to 100 Watt, these EC (electronically commutated) frameless slotted motors feature voltage windings, high pole pair count and are shipped as BLDC frameless motor kits.
Servo2Go releases Maxon EC 45 brushless servo motor kit
Available in size ranges from 30 Watt to 70 Watt, these EC (electronically commutated) frameless slotted motors feature low voltage windings, high pole pair count and are shipped as BLDC frameless motor kits.
Beckhoff introduces AMP8000 distributed servo drive system
The AMP8000 integrates a servo drive directly into a servomotor. By relocating the power electronics directly into the machine, a control cabinet needs to house a single coupling module in order to supply power to multiple servo drives with a single cable via the distribution module.
Elmo Motion Control introduces 10000w Gold Twitter servo drive
The new Double Gold Twitter delivers over 10,000w of qualitative power, fit for applications that require a reduced footprint and high power, such as large robotic vehicles, antennas and tracking systems, high power machine tooling, large printer rolls and more.
Technosoft introduces iPOS2401 servo drive with EtherCAT interface
Measuring 19 x 50 x 10 mm, and weighing 12 g, the iPOS2401 MX-CAT drive can be used in high precision positioning applications with any motor technology (brushless, stepper, DC/voice coil or linear) that requires no more than 1 A continuous at 24 V.