AutomationDirect announces High Bus Voltage (AC Input) stepper drives and motors
The AC stepper drive is powered from 90 to 240VAC and is intended for use with step motors designed to handle a high bus voltage of 340VDC. MTRAC motors are specially designed to work with high bus voltages.
AutomationDirect announces Leadshine 2-phase Digital Stepper Drives
These drives accept a range of input voltages (12-110 VDC, 18-80 VAC) and provide over-voltage and overcurrent protection, motor auto-configuration on power up and Soft-start at power on. Motor output current ranges from 0.3 to 7.2A.
Optimal Engineering Systems introduces XYR-01-01 and XYR-01-02 alignment stages
The XYR-01-01 and XYR-01-02 Alignment Stages feature linear resolutions of the X and Y axis of 0.25µ(micro-steps per step motor driver in use); the repeatability of each is 1.5µ, positional accuracy is 5µ, and backlash is 2µ.
Nanotec introduces SCA5618 stepper motor
The SCA5618 is available in three lengths and with two different windings. Depending on length, the holding torque of this stepper motor is 0.6 to 2.3 Ncm; it has a resolution of 1.8°.
Zaber releases X-MCA stepper motor controller
It has been designed to fit in tight spaces and provide a range of mounting options including 90 degree stacking and 35 mm DIN rail mounting via optional accessories AB158 and AB159.
Nippon Pulse introduces PFL20 Linearstep linear stepper motor
The PFL20 is a tin-can linear actuator with a 20mm diameter and a bipolar winding. PFL20 is RoHS-compliant, has a 30/60mm effective stroke, and can reach 6 N of force at 200 pps
Zaber releases X-RSW-SV Series vacuum compatible rotary stages with built-in controllers
The integrated stepper motor controller and motor driver allows for control, and the worm gear allows for continuous rotation. Zaber devices allow daisy-chaining in a vacuum chamber.
AutomationDirect introduces SureStep IP65 rated high-torque stepping motors
IP65 Motors are available in single-shaft configurations and have a 1-ft. cable and locking connector. Extension cables with mating IP65 connector are available in 6, 10 and 20 ft lengths.
AutomationDirect introduces SureStep family of stepper motors
The SureStep family has options for open loop control (no encoder), position monitoring (external encoder feedback), and position verification (integrated motor/drives with internal encoder).
JVL Industri Elektronik introduces ServoStep integrated stepper motor
The ServoStep integrated stepper motor series MIS171 to MIS176 have a NEMA 17 42x42 mm flange and include controller with 6 different industrial Ethernet protocols, absolute multiturn encoder, closed loop and M12 connectors.
H2W Technologies introduces LSS-016-04-006-01A-ME linear stepper motor positioning stage
The stages use H2W's STS-0620-R linear stepper motors to generate a force of 6.0 lbs [26.7 N] with a total stroke length of 16 inches [406mm] and the 1.0-micron resolution absolute encoder allows for precise positioning.
H2W introduces LSS-016-04-006-01A-ME linear stepper positioning stage
H2W introduced the LSS-016-04-006-01A-ME, a series of linear stepper positioning stage that integrates an absolute linear encoder into the single-axis linear stepper motor stage to operate the linear stepper motor as a 2-phase brushless linear motor, when coupled with motion control electronics package provided by H2W.
Advanced Micro Controls announces SMD E2 series of stepper motor controllers
AMCI’s SMD E2 Series units come standard with EtherNet/IP, Modbus-TCP, and Profinet built in. The integrated web server facilitates simple network type selection and IP address configuration.
Thomson Industries releases Thomson MLA stepper motor linear actuators
The Thomson MLA is suited for force-sensitive applications requiring shorter strokes that must be repeated with precision. Examples include adjusting a microscope slide stage, tilting a computer monitor or vertically positioning a pipette onto a test tube array.
Applied Motion Products introduces TSM, SSM & TXM series of StepSERVO Integrated Motors
Using closed loop feedback and control technology, Applied Motion StepSERVO Integrated Motors create torque for acceleration in meeting faster machine cycles.
Applied Motion Products announces STRAC2 and STRAC8 Stepper Drives
Like their DC-powered counterparts, STRAC Stepper Drives feature microstepping performance and current control with anti-resonance. Units operate on AC supply voltages of 90 to 240 VAC and wire directly to 120 or 220 VAC line voltages to eliminate DC power supply requirements.
JVL releases MIS171-MIS176 models of ServoStep integrated stepper motor series
The ServoStep integrated stepper motor series MIS171 to MIS176 have a NEMA 17 42x42 mm flange and include controller with 6 different industrial Ethernet protocols, absolute multiturn encoder, closed loop and M12 connectors.
Applied Motion Products introduces range of UL-Listed and CSA- Certified stepper motors and servo motors
Units are recognized to Standard UL-1004-6 for Servo and Stepper Motors, UL 1004-1 Standard for Rotating Electrical Machines, and Canadian CSA Standard C22.2 No. 100-14 for Motors and Generators.
Nanotec introduces SC2818 stepper motor
The SC2818 motors are available in three lengths, each with one or two shafts. The version with the B-shaft is optionally offered with an NOE1 encoder with up to 2000 increments/revolution.
JVL announces QuickStep closed-loop stepper motor technology
QuickStep is a true closed-loop control system that compensates step angle errors during a movement and correct errors within a full step. If load becomes too high speed is lowered and position errors will always stay within two full-steps