Pentek introduces Model RTR 2727A portable recorder | Automation.com

Pentek introduces Model RTR 2727A portable recorder

November 282016
Pentek introduces Model RTR 2727A portable recorder

November 28, 2016─Pentek announced the Model RTR 2727A portable recorder targets applications needing to record and reproduce high-bandwidth signals, as part of its Talon family. A complete PC workstation, the RTR 2727A provides high data capacity and aggregate recording rates of up to 4.0 GB/s in a four-channel system.

The RTR 2727A offers up to sixteen hot-swap solid state drives (SSDs) with a combined capacity to 30.7 TB sustain hours of continuous recording. The system features recording and playback of RF/IF signal frequencies up to 700 MHz with signal bandwidths up to 200 MHz. Available data converters include 500 MHz 12-bit A/Ds or 400 MHz 14-bit A/Ds and 800 MHz 16-bit D/As.

At the heart of the RTR 2727A are Pentek Cobalt Series Virtex-6 software radio boards featuring A/D and D/A converters, DDCs (digital downconverters), DUCs (digital upconverters), and complementary FPGA IP cores. Optional GPS time and position stamping allows the user to record this critical signal information.

The RTR 2727A is housed in a chassis measuring 16.0” W x 6.9” D x 13.0” H and weighing less than 30 pounds. This portable workstation features 100% aluminum alloy construction, reinforced with shock absorbing rubber corners and an impact-resistant protective glass for the 17" LCD monitor.

The hot-swappable SSD array is available in configurations from 1.9 TB to 30.7 TB and supports RAID levels 0, 1, 5, or 6. The SSDs are meticulously qualified by Pentek for optimum use in rugged and portable applications.

Available I/O includes VGA video, six USB 2.0 ports, two USB 3.0 ports and dual Gigabit Ethernet connections.

All Talon RTR Portable Recorders are built on a Windows 7 Professional workstation with an Intel Core i7 processor and provide both a GUI (graphical user interface) and API (Application Programmer’s Interface) to control the system. Systems are supported with Pentek’s SystemFlow software for system control and turn-key operation. The software provides a GUI with point-and-click configuration management and storage of custom configurations for single-click setup. The software also includes a virtual oscilloscope and signal analyzer to monitor signals before, during and after data collection.

MORE PRODUCTS

VIEW ALL

RELATED