Process Equipment Product Showcase - Automation.com

Process Equipment

August 15, 2018

NORD releases NSD TUPH surface conversion system

NORD’s NSD TUPH surface conversion system is designed for many food and beverage industry applications, where drive technology is exposed to extreme ambient conditions and highly corrosive environments.

EXAIR introduces Model 1004SS M4 NPT Back Blow Air Nozzle
March 21, 2017

EXAIR introduces Model 1004SS M4 NPT Back Blow Air Nozzle

This nozzle prevents blowing chips further into a part, tube or pipe and eliminates any safety hazard created by blowing debris out the far end of a pipe or tube.

igus releases xiros 67 and 68 thin ring bearings
February 02, 2017

igus releases xiros 67 and 68 thin ring bearings

The xiros 67 and 68 thin ring bearings are suitable for temperatures ranging from -40º - 176º F, and are available in two materials (xirodur B180 and S180) with inner diameters ranging from 4-30mm

Exair introduces 316 SS threaded line vac with NPT threads
December 06, 2016

Exair introduces 316 SS threaded line vac with NPT threads

Applications for the 316SS include gas, grain or ingredient sampling, part transfer, hopper loading, scrap trim removal, tablet transfer and packaging.

Spirax Sarco introduces TD46M range of ASME 600 thermodynamic steam traps
November 09, 2016

Spirax Sarco introduces TD46M range of ASME 600 thermodynamic steam traps

These traps offer a solution for medium pressure applications where venting air quickly during start-up and reducing warm-up time is required.

Spirax Sarco introduces FT62 range of thermostatic steam traps
October 20, 2016

Spirax Sarco introduces FT62 range of thermostatic steam traps

This range is suitable for the Oil & Gas and Specialty Chemical industries that need fast and efficient condensate removal.

Branson introduces GLX-3 laser welder
July 11, 2016

Branson introduces GLX-3 laser welder

The GLX-3 welder from Branson, an Emerson business, is designed for large-format parts that require greater laser and clamping power.

PIPE FITTINGS
July 05, 2016

PIPE FITTINGS

PIPE FITTINGS

Posted in:
Product Category: 
Process Equipment
TUBE FITTINGS
July 05, 2016

TUBE FITTINGS

INSTRUMENTATION TUBE FITTINGS

Posted in:
Product Category: 
Process Equipment
Pfannenberg announces Series PWW water-to-water heat exchangers
June 05, 2015

Pfannenberg announces Series PWW water-to-water heat exchangers

Heat exchangers use available plant water for cooling critical machinery.

Posted in:
Product Category: 
Process Equipment
Product Manufacturer: 
Pfannenberg Inc.
Related Portals:
Manufacturing Operations Management, Plant & Asset Management
Watlow Flange Heaters Comply with ASME Requirements
August 12, 2014

Watlow Flange Heaters Comply with ASME Requirements

Flange heaters meet the Boiler and Pressure Vessel Code (BPVC), Section IV revised requirements.

Posted in:
Product Category: 
Process Equipment
Related Portals:
Plant & Asset Management
I.S. interfaces / barriers
August 01, 2014

I.S. interfaces / barriers

Analog and digital intrinsically safe isolation barriers offer multifunctional inputs and outputs, for an easy-to-implement site standard.

Posted in:
Displays
August 01, 2014

Displays

Display devices meet nearly every demand for display readout of process signals, and have universal input and power supply capabilities.

Posted in:
Isolators
August 01, 2014

Isolators

6 mm isolators are based on microprocessor technology to provide exceptional performance and EMC-immunity for dedicated applications at a very low total cost of ownership.

Posted in:
Precision Digital announces Vantageview field-mounted meters
January 13, 2014

Precision Digital announces Vantageview field-mounted meters

NEMA 4X (IP65) meters are available for single process variables, rate and total, feet and inches displays for level applications, and a one-inch display for long-range visibility. Prices start at $299.

Fluid Metering releases Sensata programmable dispensing system
July 02, 2008

Fluid Metering releases Sensata programmable dispensing system

Sensata has a range from 500 nanoliters per dispense to 2 liters per minute continuous flow.

Posted in:
Product Category: 
Process Equipment
Related Portals:
Process Automation
Bematek announces wet-mix process system
January 09, 2007

Bematek announces wet-mix process system

Wet-Mix Process Systems provide users with a finished product that is homogeneous, has repeatable viscosity and dispersion down to one micron, and is totally consistent from batch-to-batch. It has a colloid mill and positive displacement feed pump. Systems can be designed for handling viscous materials from 1,000 CPS and up with flow rates from 0.5 up to 300 GPM, depending upon the application.

Posted in:
January 08, 2007

Emerson introduces turbo vaporizer for thin films

Brooks / MSP Model 2820 Turbo-Vaporizer System for fine droplet, Direct Liquid Injection (DLI) vaporization generates high purity vapor from liquid precursors required for thin film deposition. Applications include semiconductor films, chemical research, catalyst production, fiber optics, optical coatings, industrial coatings and fuel cells.

Posted in:
Product Category: 
Process Equipment
Sterilization system from Diversified Technologies produces no chemicals, heat or byproducts
August 15, 2006

Sterilization system from Diversified Technologies produces no chemicals, heat or byproducts

Industrial-scale system uses PEF (pulsed electric field) technology, resulting in bacteria kill for food pasteurization and water purification applications. It is a non-thermal, chemical-free, all solid-state system which passes liquefied food products or water through a chamber and subjects it to brief pulses of very high voltage.

Posted in:
Product Category: 
Process Equipment
New material-dispense valve from Sealant delivers precise beads, exact shots
July 13, 2006

New material-dispense valve from Sealant delivers precise beads, exact shots

Model 2200-245-051 Tip-Seal dispense valve is designed for precision dispensing of low- to high-viscosity flowable materials. It is also used in high-speed stitching or repetitive on-off applications where short segments of material are deposited onto a surface.

Posted in:
Product Category: 
Process Equipment