Electrical Safety Protection Product Showcase - Automation.com

Electrical Safety Protection

November 19, 2018

ABB releases ST 200 M supplementary protectors

Installation of the ST 200 M features ABB’s patented twin terminals with captive screws for field wiring up to AWG 4. The labeling of the ST 200 M is done with lasers, providing resistance to fading to enable identification of product type, rating and approvals, even when it is installed on the panel.

Fluke introduces Fluke Intrinsically Safe Flashlights
October 01, 2018

Fluke introduces Fluke Intrinsically Safe Flashlights

The flashlights are designed for general purpose lighting, but also offer a design specific for safe use in hazardous work sites in oil and gas, petrochemical, pharmaceutical processing, mining, paint shops, and other potentially explosive areas.

Rockwell Automation announces Allen-Bradley GuardShield 450L safety light curtain system
August 23, 2018

Rockwell Automation announces Allen-Bradley GuardShield 450L safety light curtain system

The Integrated Laser Alignment System (ILAS) of the GuardShield 450L-E provides multiple visible laser points that optimize setup with a touch of the ILAS symbol on the front window of the stick.

E-T-A Circuit Breakers releases REX12D-T Electronic Protection System
August 09, 2018

E-T-A Circuit Breakers releases REX12D-T Electronic Protection System

The REX12D-T circuit protector, in combination with the EM12D-TMB supply module that communicates via Modbus-RTU protocol, is intended for those looking to incorporate condition monitoring and predictive maintenance into their systems.

Eaton releases Bussmann series Compact Circuit Protector (CCP)
August 02, 2018

Eaton releases Bussmann series Compact Circuit Protector (CCP)

The Bussmann series Compact Circuit Protector (CCP) is a fused disconnect that features through-the-door operation and a multi-wire lug kit for application versatility while continuing to provide up to a 200 kA short-circuit current rating (SCCR), for industrial control panels, machinery and HVAC applications.

Balluff introduces ceramic caps for sensors
July 27, 2018

Balluff introduces ceramic caps for sensors

The ceramic caps provide end protection for flush-mount and cylindrical-style inductive proximity sensors. The caps can simply be threaded in place to protect the most vulnerable area of a cylindrical bodied sensor.

Posted in:
PCB Piezotronics introduces Model EX378B02 prepolarized condenser microphone system
June 05, 2018

PCB Piezotronics introduces Model EX378B02 prepolarized condenser microphone system

The EX378B02 is equipped with a free-field microphone cartridge. It has a frequency range of 3.75 to 20,000 Hz. With the low-end noise-floor measurement capability of 15.5 dBA, it can measure accurately to 137 dB at the top end.

Maxim Integrated introduces MAX22505 ±40V USB fault protector
June 04, 2018

Maxim Integrated introduces MAX22505 ±40V USB fault protector

The MAX22505 is a solution that combines USB fault protection (480Mbps) for industrial voltages, while being flexible to support either host or device applications including USB On-The-Go (OTG).

Balluff introduces face saver solution for flush mount sensor
May 11, 2018

Balluff introduces face saver solution for flush mount sensor

The face saver can be added to a flush mount sensor to increase the life of the sensor by protecting it from impact damage due to over travel and hostile application environments.

Honeywell introduces PrismShield arc flash protective face shield
October 23, 2017

Honeywell introduces PrismShield arc flash protective face shield

Salisbury by Honeywell’s new PrismShield arc flash protective face shield incorporates proprietary nanotechnology that allows a wider spectrum of light to enter the lens of the face shield.

Franklin Electric introduces SubMonitor Connect electronic motor protector
April 28, 2017

Franklin Electric introduces SubMonitor Connect electronic motor protector

The SubMonitor Connect provides capabilities of real date and time-stamped system monitoring to improve troubleshooting while protecting three-phase motor and pump systems ranging from 1 to 700 hp, or those that require up to 1000 amps.