Test / Measurement Instruments Product Showcase - Automation.com

Test / Measurement Instruments

September 10, 2018

Hexagon Manufacturing Intelligence announces 360° FMC-Tracker measurement cell

Supporting a variety of customer applications, the solution offers surface scanning, feature calculation and discrete point measurement. The 360° FMC-Tracker will be available to U.S. customers in the fourth quarter of 2018.

Yxlon introduces YXLON CTScan 3 line detector
August 02, 2018

Yxlon introduces YXLON CTScan 3 line detector

Production is now machine-supported with the CTScan 3, resulting in crystal uniformity. Due to the range and signal stability, material thicknesses can be tested with the same X-ray energy. The solid housing is particularly resistant to temperature fluctuations, for cooling of the electronics.

Micro-Epsilon introduces eddyNCDT 3060 inductive measurement system
July 27, 2018

Micro-Epsilon introduces eddyNCDT 3060 inductive measurement system

The eddyNCDT 3060 is an eddy current measuring system for displacement measurements. With more than 400 compatible sensor models and smart signal processing, the eddyNCDT 3060 is designed for inductive displacement measurement.

CAMI Research releases 64-pin Header Isolator for its CableEye cable and wire harness test systems
February 09, 2018

CAMI Research releases 64-pin Header Isolator for its CableEye cable and wire harness test systems

Recommended when there is a need for repeat connection and disconnection of test fixture cables, it is designed to allow users to minimize bent pins and wear of the headers on the main unit, expansion modules, and free-standing QuickMount housings.

Bachmann introduces GMP 232 series grid measurement module
March 15, 2017

Bachmann introduces GMP 232 series grid measurement module

The GMP232 is designed as a PLC-integrated solution, however, it can also be used in combination with a small M1-CPU as an autonomous grid measuring product.

Hexagon Manufacturing Intelligence introduces Leica Absolute Tracker AT403
March 15, 2017

Hexagon Manufacturing Intelligence introduces Leica Absolute Tracker AT403

With full IP54 certification, an operating temperature range of -15°C to 45°C and the introduction of the RapidSight aim alignment tool, the Leica Absolute Tracker AT403 is able to provide CMM capabilities in a range of challenging measurement environments.

Adcole introduces the Adcole 1302 Dual Head Camshaft Gage
January 18, 2017

Adcole introduces the Adcole 1302 Dual Head Camshaft Gage

The Adcole 1302 Dual Head Camshaft Gage features two independent opposed Heidenhain side wall measuring heads with ±10 mm travel for measuring sliding cam components with sub-micron accuracy.

Renishaw introduces RVP vision management probe
July 06, 2016

Renishaw introduces RVP vision management probe

RVP is designed to increase the multi-sensor capability of the REVO measurement system by adding non-contact inspection to the exisiting touch-trigger, tactile scanning and surface finish measurement capability of the system.

Hexagon introduces Global EVO coordinate measuring machine
April 26, 2016

Hexagon introduces Global EVO coordinate measuring machine

This CMM is tailored specifically to offer process speed and efficiency to manufacturers requiring accurate tactile scanning and high throughput.

Posted in:
LMI Technologies announces HDI Advance R4x 3D scanner
April 06, 2016

LMI Technologies announces HDI Advance R4x 3D scanner

R4x is a high-precision scanner that quickly generates 3D models for industrial metrology applications like automotive and aerospace parts inspection.

Hexagon releases software for Leica Laser Trackers
March 21, 2016

Hexagon releases software for Leica Laser Trackers

This technology adds a time dimension to the measurement data acquired by the laser tracker, made possible by interfacing its LMF communications with the new industrial EtherCAT protocol.

Hexagon releases 77 series coordinate measuring machine
January 20, 2016

Hexagon releases 77 series coordinate measuring machine

77 series is designed to provide absolute accuracy for high-end 3D measurement applications.

Posted in:
Hexagon Metrology updates TIGO SF CMM for automated measurement
September 15, 2015

Hexagon Metrology updates TIGO SF CMM for automated measurement

Enhancements include an I/O Kit that enables the CMM to interface directly with automated lines and exchange data with PLCs (programmable logic controllers).

Teledyne DALSA releases Rad-icon 2022 CMOS X-Ray detector
June 30, 2015

Teledyne DALSA releases Rad-icon 2022 CMOS X-Ray detector

Rad-icon detector is suitable for industrial x-ray inspection, scientific imaging, and non-destructive testing, including weld inspection and other demanding industrial imaging applications.

Posted in:
Product Category: 
Test / Measurement Instruments
Product Manufacturer: 
TELEDYNE DALSA
Related Portals:
Test, Measurement & LIMS Portal
Hexagon upgrades ROMER Absolute Arm Laser Scanner
April 20, 2015

Hexagon upgrades ROMER Absolute Arm Laser Scanner

RS3 upgrade package doubles the scan rate of the previous integrated laser scanner, enabling users to inspect parts in approximately half the time.

Ametek introduces Talysurf i-Series surface measurement instruments
January 07, 2015

Ametek introduces Talysurf i-Series surface measurement instruments

Talysurf i-Series measurement instruments provide automated simultaneous surface and contour inspection.

OMS announces Wing Box CHECKER measurement system for big sections
December 05, 2014

OMS announces Wing Box CHECKER measurement system for big sections

Originally developed for aerospace, the Wing Box CHECKER laser-based dimensional measurement system handles big, oddly-shaped systems--like aircraft wing boxes.

Posted in:
Aerotech releases AGV-HPO Galvo Scanner
October 30, 2014

Aerotech releases AGV-HPO Galvo Scanner

The repeatable and thermally stable feedback sensors can be calibrated down to single-digit, micron-level accuracy over the field of view.

Renishaw enhances Equator flexible gauge with TP20 touch-trigger
September 18, 2014

Renishaw enhances Equator flexible gauge with TP20 touch-trigger

Equator flexible gauge with TP20 touch-trigger gives the shop-floor comparative gauge a significant speed boost for single-point probing CMM applications.

LMT Introduces 3D Digital Scan Head
July 15, 2014

LMT Introduces 3D Digital Scan Head

The digital scan head can be provided inside an enclosure or mounted outside for in-process marking.

Posted in: