Time Sync module provides PTP and NTP and positioning services | Automation.com

Time Sync module provides PTP and NTP and positioning services

October 272015
Time Sync module provides PTP and NTP and positioning services
  • Cost effective time synchronization solution
  • Cross Platform (DCS, PLC, CompactLogix, ControlLogix, Electrical Protection Systems)
  • 1588 Precision Time Protocol (PTP) master
  • Network Time Protocol (NTP) master
  • High accuracy time synchronization (onboard GPS receiver)
  • GPS positioning - absolute and relative
  • Velocity and odometer readings

 

The Time Sync module has optimized modes for both Time and Position functions and a custom mode as detailed below.

Mode

Description

Time

The module is configured to only use the GPS constellation for best time accuracy.

Position

The module is configured to use GPS, SBAS and GLONASS satellite constellations to provide the most accurate positioning information.

Custom

This mode allows the user to select the constellations that are needed for the required application.

 

The Time Sync module is configured using the Aparian Slate application. Slate offers various configuration methods.

The module is a stand-alone device allowing it to operate across various platforms. The module can also seamlessly connect and integrate with Rockwell Automation’s Allen Bradley equipment. The module can operate in either a Logix “owned” or standalone mode. In stand-alone mode the module can be configured and connected to an Ethernet network to accurately synchronize devices using 1588 PTP and NTP. With a Logix connection the input and output assemblies will provide timing, positioning, and diagnostic information which will be available in the Logix controller environment in addition to the PTP and NTP services.

The module uses an on-board GPS receiver to provide accurate time and position information. Because the module is stand-alone and connects to various devices over an Ethernet network the module can be placed as close as possible to the antenna position removing the need for costly low-loss coaxial cables.

The on-board GPS receiver also provides velocity and an odometer reading allowing the user to implement the module in various vehicle and tracking applications. The GPS accuracy information provides the user/controller with quality metrics for the position, velocity, and odometer information.

A built-in webserver provides detailed diagnostics of system configuration and operation, including the display of GPS time, position, and velocity, without the need for any additional software.

MORE PRODUCTS

VIEW ALL