Is it time for a new automation architecture?
By Bill Lydon, Editor
Is it time for a new automation architecture instead of debating over existing ones? I started to wonder about this after reviewing more than 100 comments in our LinkedIn Discussion about my article titled, PLC vs. DCS - Competing Process Control Philosophy.
What is system architecture?
System architecture is the framework that defines the structure and functions of an automation system. The industry started with closed architectures out of necessity and has evolved to some level of open architecture.
What is the goal?
Every vendor has their view about the best automation system, but what is the goal of automation? I suggest that the high level goal is to improve quality, uptime, efficiency, and drive out labor cost of production. Other goals include:
- Reduce Application Engineering Time
- Reduce Process Control Configuration
- Simplify Network, I/O, and Other Interfaces
- Simplify Enterprise Software Interfaces (SAP, Oracle, etc.)
- Native Legacy System Interfaces
My Wish List
This is my wish list and I invite other to provide their wish list items in our LinkedIn Discussion:
I believe we should be able to eliminate gateways, proxies, and other bridging devices. Because you cannot replace all the equipment at once, having native industrial network interfaces (for DeviceNet, Profibus, EtherNet/IP, PROFINET, EtherCAT, SERCOS, etc.) on controllers is much simpler to configure and maintain. There are a number of suppliers today that support this concept but other suppliers are staunch supporters of their “flagship” protocols and they force users to add gateways and bridging devices that require special configuration steps.
Single Device Profiles
To achieve true “plug ‘n play,” we need a single industry standard profile to add devices to automation systems regardless of native protocol. This is a reality in the computer industry today where adding devices such as printers, scanners, cameras, and external drives has become a “no brainer.” Why can’t we do the same with automation systems?
Controllers should be powerful distributed computing engines and incorporate embedded historians, analytics, alarm management, equipment diagnostics, advanced control optimization, and rules engines. This would simplify the automation architecture and the controllers could perform meaningful data refinement at the information source on the plant floor. The incorporation of higher level functions directly into these new controllers eliminates the need for Level 2, 3 and 4 computers, thereby improving system performance, eliminating bottlenecks, eliminating duplicate databases, simplifying configuration control, and lowering software maintain costs.
Total Production Optimization
The present system architectures are basically “islands” of control that take a great deal of application engineering to build into coordinated plant controllers. Ideally it would be much easier to configure holistic control based on real-time business management goals.
Software Programming & Configuration
An integrated “do it once” environment for functional configuration would tie everything together including alarm logic, HMI, history, version control and other functions. This functional configuration would allow application engineers to deal with production subsystems without having to program basic logic.
Automation Apps Standard
User should be able to use and create application modules that are portable to run on any vendor’s platform. Many vendors have libraries built from their software programming environment but they cannot be shared across multiple vendors systems and controllers. The automation industry should have an Automation App standard allowing users to share applications that run on multiple vendor platforms achieving the portability and open source nature of Android Apps.
Unified Industrial Architecture
The Internet and enterprise computing are driven by open standards. Industrial automation is really a use case of computing that has not matured enough to embrace these concepts. Look at the World Wide Web Consortium (W3C) web site to get an idea of the scope of standards in the computing industry.
It can’t be done!
I can hear the comments already from vendors saying, “It can’t be done!” Throughout history people protested that new things could not be done. These are some of them:
- The first successful cast-iron plow invented in the United States in 1797 was rejected by New Jersey farmers under the theory that cast iron poisoned the land and stimulated the growth of weeds.
- Those who loaned Robert Fulton money for his steamboat project stipulated that their names be withheld for fear of ridicule were it known that they supported such a thing so “foolhardy.”
- Joshua Coppersmith was arrested in Boston for trying to sell stock in the telephone. “All well informed people know that it is impossible to transmit the human voice over a wire.”
- Scientist Simon Newcomb said in 1906 just as success for the airplane was in the offing, “The demonstration that no combination of known substances, known forms of machinery, and known forms of force can be united in a practical machine by which men shall fly, deems to the writer as complete as it is possible for the demonstration of any physical act to be.”
What is your wish list?
Please share your wish list items in our LinkedIn Discussion Group and we will publish a follow-up article based on your feedback.
Improving Worker Safety with Automatic Tank Gauging
By Christoffer Widahl, Emerson Automation Solutions
Manual tank gauging at oil and gas extraction sites is a dangerous and potentially fatal...
The Death of Windows CE Gives Rise to IoT Real-Time
Although there has been no direct comment regarding the future of Windows Compact (CE), it’s clear that CE is giving way to Windows 10 IoT Core....
Why You Need to Adopt PLC Software
Whether for industrial or business purposes, a system that integrates all systems and accessories is the best. But with many software versions...
Benefits of Using Motion Control Software
Traditional motion control requires extensive hardware and software installations. This can be an expensive undertaking to acquire all the required...
Why Soft Motion Is the Best Motion Controller on the Market
Management and motion control is a task requiring specialized equipment and software. An undertaking that required massive investment has now been...
InfinityQS Report: Enterprise visibility is the first step to Industry 4.0
InfinityQS found in its recent survey of 260 manufacturers that 75% of respondents are still manually collecting data. 47% of those rely on pencil...
Siemens announces launch of Lifelong Educational Advantage Program
The effort is designed to give high school and technical school graduates a basic-to-advanced machine tool knowledge that will benefit them in...
HIMA announces framework agreement with Pepperl+Fuchs
The agreement comprises the jointly developed H-system termination boards and associated modules from Pepperl+Fuchs, which are connected through...
VDMA Report: European machine vision industry sees record year in 2017
According to the results of the VDMA incoming order and turnover statistics, the European machine vision industry grew by 10 percent in 2016 in...
CMR announces opening of Thailand automation engineering operation
The Bangkok-based operation will provide a range of engineering services, including switchboard supply and fabrication, to the country’s sugar...