A subsidiary of the International Society of Automation
Cancel
Search Sponsored By Sponsor

Products for PLCs and PACs

Itris Automation announces ICS Monitoring real-time diagnostic solution

  • Itris Automation

This solution supports the troubleshooting of PLC-based control systems, by facilitating the understanding of the system and by helping to find the origin of a problem more quickly.

Opto 22 releases GRV-CSERI-4 groov serial I/O module

  • Opto 22
  • OPTO 22

This module plugs into a groov EPIC chassis alongside Opto 22’s groov Edge Programmable Industrial Controller (EPIC) and discrete and analog I/O modules, to provide the mix of analog, discrete, and serial signals at any location.

AutomationDirect announces Productivity1000 micro-modular PLC with enhanced I/O capabilities

  • AutomationDirect
  • AutomationDirect

The micro stackable P1000 PLC system provides communications, programming, integrated data storage, and a full lineup of discrete, analog and specialty I/O modules.

Microchip Technology introduces dsPIC33CK digital signal controller

The dsPIC33CK DSC has expanded context-selected registers to reduce interrupt latency and instruction execution to accelerate Digital Signal Processor (DSP) routines.

OES announces AU200-170x170 precision stage

Designed for applications such as: alignment, assembly, laser drilling, machining, medical, industrial, semiconductor handling, testing, scanning, and optical applications, this black anodized aluminum XY stage can integrate into new or existing systems.

ABB introduces ABB ACQ580 variable frequency drive

  • ABB

The ABB ACQ580 variable frequency drive (VFD) for the water and wastewater industries is designed to optimize wire-to-water/-air efficiency. It also works to improve flow and reliability in municipal pumping and aeration applications.

KEB Automation and KUKA partner to release C6 HMI LC system

  • KUKA Systems GmbH

The KEB system combines display, using an HMI, and control, via a PLC – in a single machine. EtherCAT, as a fieldbus, also facilitates connection to the robot.

AutomationDirect announces StrideLinx Cloud Notify License

  • AutomationDirect
  • AutomationDirect

The service provides customized alarm names, priority level and instructions for each alarm, and customized alarm recipients. Cloud Notify expands StrideLinx data services by allowing customers to receive remote notification when a process variable in their plant or machine is out of spec.

Parker announces release of Automation Manager 1.4

While the PAC is Parker’s machine controls solution that combines PLC, HMI, and motion control functionality into a single device, Parker Automation Manager (PAM) is a single integrated development environment (IDE) used to program it.

Siemens introduces "PCU Retrofit for Sinumerik 840D" service

  • SIEMENS
  • Siemens

During the retrofit, the existing Sinumerik PCU50 and MMC103 hardware and software components are removed and replaced with a Simatic IPC 427D industrial PC with Windows 10 and up-to-date HMI Advanced (human-machine interface) operating software.

Beckhoff Automation announces CX7000 Embedded PC as PC-Based Controller

  • Beckhoff Automation

Equipped with an ARM Cortex-M7 processor (32 bit, 400 MHz), the CX7000 Embedded PC, with dimensions of 49 x 100 x 72 mm, ensures scalability of PC-based control for small controller applications

Beckhoff Automation announces three I/O modules for their TwinSAFE safety controllers

  • Beckhoff Automation

The three I/O modules can be used as controllers for the direct execution of customer-specific safety projects. A special feature is their communication capability.

ABB announces Asset Management Application

  • ABB

The Asset Management Application is a digital solution that enables process industries to manage and protect their assets through predictive and preventative maintenance.

ABB announces release of Freelance 2019 distributed control system (DCS) solution

  • ABB

The Freelance suite of solutions comprises Freelance Operations for use at operator level, a scalable process level option, and Freelance Engineering which is used to configure and commission the system including the operator interface.

Aerotech releases GL4 scanner controller

  • Aerotech Inc

The GL4 uses interpolation electronics to provide up to 26-bits of effective resolution while onboard real-time 2D calibration ensures accurate beam placement over the entire field of view.

H2W Technologies releases BLSM-1F brushless linear motor

The motor can be driven using either a trapezoidal or digital standard three phase brushless amplifier. The Brushless Linear Motor Coil measures 6.53 in X 7.50 in x 1.50 in [170 mm x 190 mm x 38 mm].

Softing introduces eATM tManager for CompactLogix PLC module

  • Softing Inc.

tManager is part of a portfolio of in-chassis connectivity modules for Rockwell Automation. In-chassis modules include OPC Server, OPC UA Server, OPC UA MDIS Server, database, and PLC connectivity solutions.

AutomationDirect introduces ReeR MOSAIC safety controller system

  • AutomationDirect
  • AutomationDirect

As a stand-alone controller, the M1 master MOSAIC module has 8 inputs, 2 safety outputs, 2 status outputs and 2 inputs for Start/Stop interlock (RST) and external device monitoring (EDM).

AAEON introduces BOXER-6750 DIN rail-mount-designed box PC

  • AAEON Electronics, Inc.

The BOXER-6750 measures 69mm x 183mm x 155mm and is fitted with the Intel Core i3-6100U or, for customers with lower performance demands, the Intel Celeron 3955U.

Microchip Technology introduces SAM R34/35 LoRa System-in-Package (SiP) family

Powered by the SAM L21 Arm Cortex-M0+ based MCU, the SAM R34 devices provide sleep modes as low as 790 nA to reduce power consumption in end applications. Integrated in a 6 x 6 mm package, the SAM R34/35 family is designed for a broad array of IoT applications.

Microchip Technology introduces SAM L10 and SAM L11 MCU families

Microchip enables security by including chip-level tamper resistance, secure boot and secure key storage that, when combined with TrustZone technology, is designed to protect customer applications from both remote and physical attacks.

Balluff releases RS232 to IO-Link converter module

The RS232 converter is designed for bi-directional communication, enabling communication over a variety of serial devices on the plant floor

Microchip Technology introduces PL360B PLC modem

Designed to address PLC protocols such as ITU G.9903 (G3-PLC) and ITU G.9904 (PRIME), as well as CENELEC, FCC and ARIB compliant applications, the PL360B is the latest device in Microchip’s portfolio of smart energy products.

AutomationDirect introduces BRX Micro PLC I/O expansion modules

  • AutomationDirect
  • AutomationDirect

Three 32-point discrete I/O and five analog I/O expansion modules as well as three new temperature input modules have been added. Three 4-channel analog input and two 4-channel analog output modules are now available with current and voltage signal options.

Microchip Technology introduces CEC1702 microcontroller with DICE security standard support

The CEC1702 IoT development kit with the DICE architecture comes with a programmable 32-bit ARM Cortex-M4 Controller and sample code to develop a secure, cloud-connected solution.

Optimal Engineering Systems announces seven solenoid control modules

  • Optimal Engineering Systems (OES)

Applications of these modules measuring 3.000 in. x 3.000 in. include: solenoids, valves, actuators, DC motors, electromagnets, hydraulics, LEDs, power amplifiers for electro-pneumatic proportional valves, and pressure and flow control valves.

Microchip Technology introduces PIC18 Q10 and ATtiny1607 families of microcontrollers

Suitable for applications that use closed-loop control, the PIC18 Q10 and ATtiny1607 MCUs are the CIPs that independently manage tasks required from the CPU.

Lanner introduces V3G and V3S vehicle gateway controllers

  • Lanner Inc.

V3G and V3S feature the 14 nm Intel Atom x7-E3950 SoC (formerly Apollo Lake). V3G has I/O peripheral connectivity including 2 x serial COM ports, 2 x video output by DVI-D, USB and Digital I/O ports,

Nanotec introduces PD2-C-IP brushless DC servo motor

The PD2-C-IP is available as a brushless DC motor, with an operating voltage of 12-48 V and a rated power of 105 W, and as a stepper motor with a nominal torque of up to 0.5 Nm.

AAEON releases AIOT-MSSP01 industrial-grade vending controller solution

  • AAEON Electronics, Inc.

The AIOT-MSSP01 comprises two connected boards. The main board houses the MCU host, six USB ports and a further internal USB connector. The upper, I/O board handles the majority of the vending functions.

Omron Automation releases NX-series safety controller with CIP Safety support

  • Omron Automation & Safety
  • OMRON Automation & Safety

This addition means that the controller supports two industrial safety networks – CIP Safety and Safety over EtherCAT (FSoE). The controller is optimized to support applications in industries like automotive manufacturing and food factories.

Sterling Systems & Controls announces Hand Prompt Batching Station

  • Sterling Systems & Controls, Inc.
  • Sterling Systems & Controls, Inc.
  • Sterling Systems & Controls, Inc.

The Hand Prompt Batching Station serves a range of industrial applications where the negative effects of time consuming and problematic manual batching needs to be eliminated.

IBASE announces MAI602-M4D80 motion control system

  • IBASE Technology Inc.

The MAI602-M4D80 motion control system can be used in various factory production applications such as automated optical inspection, semiconductor wafer handling, packaging and material handling systems.

IDEC announces BACnet/IP support for MicroSmart FC6A Plus PLCs

  • IDEC Corporation

This open protocol has been standardized under the ANSI/ASHRAE 135-2012 specification for interoperability among systems built by different manufacturers.

Advanced Micro Controls announces SMD E2 series of stepper motor controllers

  • Advanced Micro Controls Inc.

AMCI’s SMD E2 Series units come standard with EtherNet/IP, Modbus-TCP, and Profinet built in. The integrated web server facilitates simple network type selection and IP address configuration.

Process Sensors Corporation introduces PSC-PMB-SOLO non-contact infrared temperature sensors

Analog and relay outputs are available via separate DIN rail mounted modules with use of an optional PSC-PM180 touch screen display. Configurable parameters include emissivity settings, response time and averaging via a PLC or optional touch screen display.

Thomson Industries releases Thomson MLA stepper motor linear actuators

  • Thomson Engineering, Inc

The Thomson MLA is suited for force-sensitive applications requiring shorter strokes that must be repeated with precision. Examples include adjusting a microscope slide stage, tilting a computer monitor or vertically positioning a pipette onto a test tube array.

Real Time Automation introduces 460ETCWI-N2E web interface

  • Real Time Automation, Inc.

The 460ETCWI-N2E helps users to monitor ControlLogix PLC data from Excel or pull table values into any industry-standard web client application.

Future Design Controls introduces MCT4 ¼ DIN multi-loop controller

  • Future Design Controls, Inc.

The MCT4 will provide control for applications in various markets including semiconductor, automotive, heat treating, packaging, food & beverage, chemical, HVAC, laboratory, etc. where control, monitoring and/or data logging is required.

Unitronics announces line of Variable Frequency Drives

  • Unitronics

The addition of a VFD product line is designed to simplify workflow by enabling customers to obtain VFDs, PLCs, and HMIs from a single supplier, program them all in a single software, and receive support from the same team throughout a project.