A subsidiary of the International Society of Automation
Cancel
Search Sponsored By Sponsor

Products for Calibration & Test

Fluke introduces Fluke 710 mA Loop Valve Tester

  • Fluke Corporation

The Fluke 710 mA Loop Valve Tester allows technicians to source the 4-20 mA signal while it interrogates HART data to collect critical information about the valve’s position and status, providing checks of control valves while they are in place.

Additel introduces ADT875 Dry Well Calibrator

Each unit has performance specifications related to the guidelines published in Euramet cg-13 specifying stability, radial and axial uniformity, loading, and hysteresis.

AMETEK Sensors announces automatic calibration alert to XP2i pressure gauge

  • AMETEK
  • Ametek

Manual record-keeping and notifications are replaced by customizable on-screen alerts prior to the due date, warning alerts on and after the due date, and an optional capability to lock the gauge from use after its calibration due date. Dates, reminders and message types are set by supervisors through free software.

Yokogawa introduces LS3300 AC power calibrator

  • Yokogawa Corporation of America

The LS3300 can calibrate AC voltage, current, and power as well as test both phase difference and power factor. The LS3300 delivers an accuracy of 0.045% and a stability of 0.01% per hour.

Fluke introduces Fluke 729 Automatic Pressure Calibrator

  • Fluke Corporation

The Fluke 729 Automatic Pressure Calibrator is designed to simplify the calibration process by automatically generating precise test pressures, compensating for leaks, and automatically documenting the pressure calibration process to help meet compliance and regulatory requirements.

FCI introduces VeriCal calibration verification system for ST100 series of flow meters

  • FCI - Fluid Components International

This calibration verification system is designed to lower flow meter operating costs in flare gas applications aboard offshore platforms, at land-based oil/gas facilities and in petrochemical plants.

Fluke introduces 6109A and 7109A portable calibration baths

  • Fluke Corporation

The 6109A and 7109A feature tank volumes of 112 mm square tank opening by 154 mm deep, allowing technicians to immerse four sanitary sensors at a time — including batches of odd shaped sensors of varying lengths and diameters, which can be accommodated with room left for a reference thermometer.

AMETEK releases PTC-425 temperature calibrator

  • AMETEK
  • Ametek

The PTC-425 has a temperature range of 33C to 425C (91F to 797F) making it ideal for sterilization tunnels as well as validation and monitoring applications in the pharmaceutical, medical and food industries.

Fluke releases Version 9 of MET/CAL Calibration Management Software

  • Fluke Corporation

MET/CAL is a software suite consisting of two applications: MET/CAL for automated calibration and MET/TEAM® for test and measurement asset management.

Fluke introduces the 154 HART Calibration Assistant

  • Fluke Corporation

Combined with a Fluke 750 Series or 720 Series calibrator it delivers a comprehensive HART calibration and configuration solution