Products for SCADA & RTU

Opto 22 announces version 2.0 of groov EPIC firmware

  • Opto 22

The groov EPIC 2.0 firmware includes updates to both of groov EPIC’s real-time control engines and provides a refresh to many ecosystem components.

Yamaha Motors announces YK610XE-10 and YK710XE-10 SCARA robots

  • Yamaha Robotics

Both models deliver 10kg maximum payload and standard cycle time of 0.39 seconds (YK610XE-10) or 0.42 seconds (YK710XE-10).

Phoenix Contact introduces EMpro energy monitoring device

  • Phoenix Contact

The EMpro tracks energy parameters such as voltage, current, and power at the machine or system level. It then communicates that data locally, or transmits it to cloud-based services, creating an IIoT energy-monitoring solution.

ADISRA announces ADISRA SmartView 4.0, HMI and SCADA package

ADISRA SmartView allows users to develop effective interfaces displaying the critical information they need to deploy, monitor, and analyze a machine’s operation and overall status.

Inductive Automation announces improvements to Ignition line of products

  • Inductive Automation

The four solutions relate to Ignition by Inductive Automation. Ignition is an industrial application platform with tools for building solutions in human-machine interface (HMI), supervisory control and data acquisition (SCADA), and the Industrial Internet of Things (IIoT). Ignition is used in many industries, in more than 100 countries.

CAS Dataloggers announces Novus DigiRail Connect distributed I/O module

  • CAS DataLoggers

This product features mixed analog and digital inputs and outputs, which accept a variety of standard sensor and signal types including thermocouples, RTD’s, voltage, and 0-20 mA current.

GE Digital announces enhanced versions of Predix Essentials, Asset Answers and Webspace 6.0 software

  • GE Digital

The enhancements are intended make it possible for companies to operate their plants, analyze industrial data and optimize their operations.

Connexa introduces hybrid power skids

  • Connexa
  • Connexa

These skids fully integrate UPS DC power, solar charging, generator interaction, motor controls, SCADA, power distribution (DC and AC), and data harvesting via IIoT or SCADA topologies.

Fluke introduces Integrated Condition Monitoring for Maximo

  • Fluke Corporation

Fluke is adding condition monitoring data to IBM Maximo with Integrated Condition Monitoring for Maximo, a solution that incorporates real-time asset data within existing IBM Maximo workflows.

Pepperl+Fuchs introduces DeviceMaster EIP-MOD gateways for EtherNet/IP controllers

  • Pepperl+Fuchs

The gateways enable EtherNet/IP controllers—such as CIP complaint controllers that support Class 1 and Class 3 connections, including PLCs, HMIs, SCADA systems, and OPC servers—to connect to Modbus master controllers.