A subsidiary of the International Society of Automation
Cancel
Search Sponsored By Sponsor

AutomationDirect Products

AutomationDirect introduces left-hand models to IronHorse worm gearbox line

  • AutomationDirect
  • AutomationDirect

Constructed of cast iron one-piece housings, the worm gearboxes feature a C-flange input. Designed to change drive direction by 90 degrees and to increase torque output, worm gearboxes are used when space is at a premium, such as for conveyors, or mechanical design.

AutomationDirect introduces Marathon Powerwash SXT motors

  • AutomationDirect
  • AutomationDirect

Jet pump motors are commonly used in commercial and industrial water treatment and processing applications to power centrifugal and hydraulic pumps. Marathon jet pump motors are available in single and three-phase, and in TEFC and Open Drip Proof (ODP) designs.

AutomationDirect introduces 54 new STEGO products

  • AutomationDirect
  • AutomationDirect

New products include hose-proof hoods for filter fans, hazardous area heaters, thermostats/hygrostats/hygrotherms, and a line of Ecoline LED lights.

AutomationDirect introduces SureMotion line of linear and rotary shafts

  • AutomationDirect
  • AutomationDirect

SureMotion hardened rotary shafts are precision ground for a surface finish of 10RMS. Models are available in diameters up to 3/4 inch and precut lengths up to 36 inches.

Automation Direct announces MTR2 series IronHorse general purpose motors

  • AutomationDirect
  • AutomationDirect

Single-phase MTR2 rolled-steel motors are available in 1800 RPM, 115/230 VAC models. The motors are 56C frame, TEFC, and provide rigid base or C-face mounting. Nameplates include 60 & 50Hz specifications and reverse wiring instructions.

AutomationDirect introduces igus' CF5 and CF6 multi-conductor control cables

  • AutomationDirect
  • AutomationDirect

igus Chainflex cables are available with 3 to 25 unshielded (CF5 series) or 4 to 12 shielded (CF6 series) conductors in 20 AWG to 14 AWG sizes. Chainflex cable is sold in 20, 50, 100, 250 and 500 ft. lengths.

AutomationDirect introduces V3 series of AC-powered inductive proximity sensors

  • AutomationDirect
  • AutomationDirect

These sensors operate on 20-250 VAC/VDC input voltage with N.O. and N.C. output options available. The sensors are short-circuit protected and have a yellow LED status indicator that is output energized.

AutomationDirect introduces STRIDE SiteLink remote access cloud enabler

  • AutomationDirect
  • AutomationDirect

The SiteLink platform consists of three types of VPN routers and two antenna sets (Wifi and cellular). 5GB monthly data bandwidth is included free and subscription options include additional bandwidth (up to 50GB) and cloud data logging.

AutomationDirect introduces CLICK Series stackable micro brick PLCs

  • AutomationDirect
  • AutomationDirect

These CLICK Ethernet/Analog PLC units are available with a variety of current and voltage (0-20mA, 4-20mA, 0-5VDC, 0-10VDC) inputs and outputs, with 24 VDC or 120 VAC discrete inputs and DC or relay outputs.

AutomationDirect releases BRX PLC I/0 expansion modules

  • AutomationDirect
  • AutomationDirect

Two 8-channel analog current and voltage input modules and two 8-channel current and voltage output modules are available. Current signal ranges are 0-20 mA, 4-20 mA; voltage ranges are 0-5 VDC, 0-10 VDC, +/- 5 VDC, +/- 10 VDC. Input and output signal resolution is 16-bits (external 24 VDC required).