AutomationDirect Products
AutomationDirect introduces Expansion Modules for the BRX Micro PLC System
- AutomationDirect
- AutomationDirect
BRX expansion modules add discrete I/O, analog I/O and now high-speed I/O and communications functionsas needed to expand machine and process control applications.
AutomationDirect introduces Dold safety relays
- AutomationDirect
- AutomationDirect
These speed safety relays provide overspeed, under speed and/or standstill detection for single- or three-phase motors by monitoring either external proximity sensors mounted on a rotating element of the motor or load, the frequency of the motor power signal or the remanence voltage (back EMF) of the motor signal.
Servo2Go introduces Kollmorgen VLM servo motor series
- AutomationDirect
- AutomationDirect
The VLM series motors are available with standard frame sizes of 60 mm and 90-mm or NEMA 23 and 34 in each of the six most popular motor sizes and with a choice of twelve standard windings.
AutomationDirect introduces DN-FE-16T crimping tool
- AutomationDirect
- AutomationDirect
This crimper is identical to AutomationDirect’s two existing self-adjusting crimpers, other than having the rotatable die and trapezoidal crimp profile.
AutomationDirect introduces AcuAMP Solid Core current transformers
- AutomationDirect
- AutomationDirect
Available in primary current ranges up to 1000A, the AC transformers are designed for applications such as motor run status, pump dry run indication, and monitoring of conveyors, heaters, and power.
AutomationDirect introduces SureStep IP65 rated high-torque stepping motors
- AutomationDirect
- AutomationDirect
IP65 Motors are available in single-shaft configurations and have a 1-ft. cable and locking connector. Extension cables with mating IP65 connector are available in 6, 10 and 20 ft lengths.
AutomationDirect announces SOLO Basic temperature controllers
- AutomationDirect
- AutomationDirect
These basic controllers are IP66 rated for dust and water jet ingress protection (inside suitable enclosure) and have a 0°C to 50°C operating temperature range.
AutomationDirect introduces ProSense DGA differential pressure gauges
- AutomationDirect
- AutomationDirect
These gauges feature an industrial grade black die-cast aluminum case with two high pressure and two low pressure connection ports (1/8" female NPT), and a 4-inch (100 mm) white aluminum dial with black pressure markings.
AutomationDirect announces 325 frame size IronHorse cast iron worm gearboxes
- AutomationDirect
- AutomationDirect
These 3.25” input to output shaft distance gearboxes areavailable in ratios of 10:1, 15:1, 20:1, 30:1, 40:1, & 60:1 with outputs in left hand shaft, right hand shaft, dual shaft, and hollow shaft.
AutomationDirect announces Contrinex DW series of inductive proximity sensors
- AutomationDirect
- AutomationDirect
Contrinex DW series 4mm, 5mm, 8mm and 12mm diameter round body inductive proximity sensors have been added.
AutomationDirect introduces Hammond industrial enclosures
- AutomationDirect
- AutomationDirect
A variety of metal and non-metal enclosures, rated NEMA 1, 3, 3R, 3S, 4, 4X, 6, 6P, 12 or 13, are available in wall-mount, floor-mount and freestanding form factors.
AutomationDirect announces High Bus Voltage (AC Input) stepper drives and motors
- AutomationDirect
- AutomationDirect
The AC stepper drive is powered from 90 to 240VAC and is intended for use with step motors designed to handle a high bus voltage of 340VDC. MTRAC motors are specially designed to work with high bus voltages.
AutomationDirect announces Leadshine 2-phase Digital Stepper Drives
- AutomationDirect
- AutomationDirect
These drives accept a range of input voltages (12-110 VDC, 18-80 VAC) and provide over-voltage and overcurrent protection, motor auto-configuration on power up and Soft-start at power on. Motor output current ranges from 0.3 to 7.2A.
AutomationDirect announces IronHorse HBR series of helical bevel gearboxes
- AutomationDirect
- AutomationDirect
The universally interchangeable design provides flexible installation with C-face and TC-face inputs, perpendicular output and 6 mounting positions. Five gearbox sizes support 56C up to 254/6TC NEMA motor frames and 6 ratios are available from 10:1 to 120:1.
AutomationDIrect introduces DataMax Extreme Industrial Profinet cables
- AutomationDirect
- AutomationDirect
Shielded constructions include both a tinned copper braid shield and aluminized polyester foil overall shield. The cable's outer jacket is pressure extruded Thermoplastic Elastomer (TPE) with moisture, chemical, UV and weathering resistance,low temperature flexibility, and good flame and fire resistance.
AutomationDirect introduces AEP series of thermoplastic compact limit switches
- AutomationDirect
- AutomationDirect
These plastic limit switches have standard U.S. 25mm mounting hole spacing; housings are double-insulated and epoxy resin-filled, providing IEC IP67 protection. Contacts are Snap-action (Z11) with 1 N.O. and 1 N.C. contact on all units.
AutomationDirect announces ProSense VFS series vortex flow sensors
- AutomationDirect
- AutomationDirect
Vortex flow sensors are intended as a method for measuring flow of water-based liquids that is independent of the liquid's pressure or temperature fluctuations.