• ISA provides technical resources and standards to help industrial automation professionals advance their careers and the field. We enable automation professionals worldwide to solve problems and enhance their skills by bringing people together to create new technologies and share best practices with future automation professionals.

    • Industry Insights

  • We attract over 140,000 unique automation professionals monthly, making us the premier online content provider and the only dedicated electronic magazine in the automation industry.

    Monthly Magazine

    Back
    Back
  • M logo for Automation.com Monthly. Link to current issue.
  • Search Sponsored By:
News

4-20mA/0-5V to RS485/232 MODBUS RTU Setting instructions

Source: Shenzhen WAYJUN Industrial Automation
26 May, 2014
1 min read
4-20mA/0-5V to RS485/232 signal isolated converters

Setting Steps:

1.Connect power supply line and communication line(485 or 232 interface), Short circuit PIN7 and PIN8(as shown in the pictures below)

2.Open software “WAYJUN Test”,select communication serial port and baud rate,input command “$

00P1

”,click“

Send

”,if “

Response

”shows

!00

,it indicates that WJ21 or WJ31 device has been set to Modbus protocol.Then turn off the power supply,remove short lines between PIN3 and PIN6. (If no response,please check connection and communication interface)

Advertisement

Trending Articles

Advertisement

Related Articles

View all Articles and News
Advertisement
Advertisement

International Society of Automation
PO Box 12277

Research Triangle Park, NC 27709

E-Mail: [email protected]

©2026 Automation.com, a subsidiary of the International Society of Automation.