New 16-bit analog modules for DirectLOGIC DL05 and DL06 PLCs are now available from
AutomationDirect
. These modules provide higher resolution for more precision in measurement and control applications. 8-channel input modules are available with input ranges of 0-20/4-20 mA and 0-5 V or 0-10 V. Four and 8-channel output modules have ranges of 4-20 mA or 0-10 V. The six new 16-bit analog modules for the DL05 and DL06 range in price from $129 to $189.
DL06 PLC - Analog I/O Option Modules The DL06’s analog capabilities are a great fit for a variety of applications at a fraction of the competition's price. Install one of our analog option modules and wire directly to the most common analog devices, such as pressure and level transmitters, proportional valves, AC drives and panel meters.Combine our analog I/O modules with any DL06 for the lowest-cost analog control in its class. You can buy two DL06 systems for the price of one of our competitors’ systems. The DL06 supports its great analog capabilities with eight PID loops with “auto-tune” and floating point math at no additional charge.
- A large selection of Analog option modules
- Analog modules are the smallest and lowest priced in the industry
- Signal ranges of 4-20 mA or 0-20 mA, and 0-5 V or 0-10 V input and output ranges available
- Thermocouple and RTD temperature inputs
- Removable terminal blocks available on all modules
- Eight PID loops with auto-tune
- Automatic loop scheduling
- Fill-in charts for alarms and ramp/soak profiles
- DirectSOFT programming software includes the loop tune screen with trending What type of analog control can the DL06 handle?
- Build a micro process controller using the PID loops combined with the analog option modules.
- Monitor and control the level of a remote tank, well, or pumping station by combining a DL06 with our industrial telephone modem.
- Create a Modbus RTU network of several DL06 PLCs, each with an analog option module, for a low cost distributed control system.
- Even incorporate a PC HMI on the same network for a complete SCADA system.
- Add operator display capability right on the DL06 PLC with the $73.00 (D0-06LCD) optional LCD display.
- F0-08ADH-1 - 8-channel analog input module, range: 0-20mA or 4-20mA current input
- F0-08ADH-2 - 8-channel analog input module, range: 0-5V or 0-10V voltage input
- F0-08DAH-1 - 8-channel analog output module, range: 4-20mA current output
- F0-08DAH-2 - 8-channel analog output module, range: 0-10V voltage output
- F0-04DAH-1 - 4-channel analog output module, range: 4-20mA current output
- F0-04DAH-2 - 4-channel analog output module, range: 0-10V voltage output NOTES: New option modules may not be supported by CPUs purchased prior to the modules release. Be sure to check for the latest firmware for your PLC. You can refer to the module specification page on our Web site for this information, or find it in our free catalog. AutomationDirect offers thousands of industrial automation products through its Online Superstore and 1,900-page catalog.
Add a local operator interface to set and view parameters.
DL05/ DL06 Analog I/O Modules
DL05/06 Analog I/O Modules - 16-bit resolution ... NEW!
Products include Programmable Logic Controllers (PLCs), AC drives/motors, operator interface panels/HMI, motor controls, DC power supplies, push buttons, sensors, NEMA electrical enclosures, wire duct and more.
The company offers high-quality automation products at incredible prices, along with detailed documentation and superior sales and technical support.
Same-day shipping on in-stock items ordered by 4 p.m.
ET is standard.
A 30-day, money-back guarantee is offered on most items, including software.Select the process controls and industrial wiring supplies you need from over 6,000 quality products, often priced well below the industry average.
To request a free catalog, visit their Web site or call 800-633-0405.
