February 8, 2012 - AutoVimation's Salamander series for compact cameras is designed for cameras with a cross section between 29 x 46 and 38 x 38 mm, and provide IP67 protection.
The rear wall is available in three versions.One option features one M20 and one M25 cable gland with large seal inserts which enables users to feed through LAN and power or I/O cables. Another model with an M32 cable gland featuring a closed seal insert is suitable for more than two cable entries or large connectors with a maximum diameter of 26 mm. Depending on the desired number of cables and their diameter, multiple holes can be drilled in the seal insert. In the third model, all cables are fed through a corrugated tube that is attached to the rear wall via an IP69K push-in connector.
A deep front lid means that the lens protrudes, allowing for easier access to the aperture ring. A quick lock and heat guide system thermally couples all cameras with a maximum height of 38 mm to the outer enclosure wall, thereby ensuring passive cooling and vibration-proof installation.
