Author Profile

This database, called FLUIDAT, is used by the company for configuration and calibration of its portfolio of flow meters and controllers, and for calculating pressure differences, valve seats, etc..

By Stefan Reuther, COPA-DATA Industry 4.0, the Fourth Industrial Revolution or the Industrial Internet of Things (IIoT). Regardless of the phrase used to describe digitalization in manufacturing, there’s no denying that a shift has already taken place. This article gives three predictions for industrial automation in 2019 — no buzzwords included.

You may become nerdy programming PLCs, but once you get into it, you won't care. This post is about programming PLCs. Specifically programming PLCs with Ladder Logic. This is what I've done almost daily for my job for the past several years.

The Dynatrol CL-10GP Proportional Level Detector and EC-103C(G) Control Unit monitor and control a precise liquid level range due to its proportional output signal.

This voice coil motor has a force to size ratio of 5.3 lbs (23.5 N) continuous force and 16.7 lb (74.4 N) of peak force at 10% duty cycle with a housing measuring 2.00 in. (50.8 mm) dia. x 1.00 in. (25.4 mm) long.

Founded in the early 1940’s, MCAA has been serving industry organizations for seventy-five years. MCAA is the trade association for manufacturers and distributors of instrumentation and systems associated with the Measurement, Control & Automation Industry.

The top process industries grew at a faster rate than the top discrete industries in 2017, and this trend continued in 2018, according to the “Low Voltage Motors Report” from IHS Markit.

Under the agreement, the IIC and GlobalPlatform will work together to align efforts to maximize interoperability, portability, security and privacy for the industrial Internet.

The support for PROFINET @ TSN technology will be on its portfolio of netX multiprotocol network controllers. netX is a single-chip ASIC that provides a master and/or slave communication connection to all Industrial Ethernet systems, fieldbuses and Industry 4.0 protocols.

With autonomous operation of stackers and reclaimers, Binxin Steel will be able to achieve full utilization of the stockyard area, and optimized energy consumption. Siemens’ automation solutions secure autonomous operation of the end customers’ stackers and reclaimers.

The latest release includes efficiencies designed to strengthen the turnkey IoT platform’s real-time monitoring, rules-based analytics, and autonomous decision-making capabilities.

OPC Client for MQTT leverages MQTT protocol and OPC standard to link devices and sensors with the Cloud. In fact, it collects real-time data from multiple OPC DA servers.

Learn the benefits of knowing your process and PID capability, with a focus on process behavior, loop objectives and different industrial applications.

The BCT-200 can be used to manufacture and package both vacuum and non-vacuum blood collection tubes. The machine can therefore dispense common additives, such as gel, EDTA.K2, EDTA.K3, lithium herapin, trisodium citrate, and more.

With continuous force ratings to 200 kN (45,000 lbf) pressing, and speeds to 401 mm/sec (15.8 in/sec), and stroke lengths from 150 mm (6 inches) to 900 mm (36 inches), the FTP Series can be applied across a wide range of pressing applications.

Previously, Bishop was the Vice President of Finance, Planning, Analysis, Reporting, and Process Improvement for Macy’s Logistics. He also has experience as the Senior Vice President of Logistics at Levitz Furniture, Vice President of Supply Chain at Giggle, and Director of the East Region Distribution at Toys R Us.

By Nick Boughton, Boulting Technology Engineering giant Rolls Royce pioneered servitization in 1962 with its Power-by-the-Hour approach to jet engine maintenance management. This article discusses what servitization can offer other industries including high-volume, low-margin manufacturing.

The 2019 product catalog features performance data, sizes, specifications, and technical references for the company’s portfolio of current sensing switches, transducers, transformers, and ground fault protection products.

Bernardin succeeds Jim Cooper, who is moving on to become the full-time CEO of DigitalEd, a company Maplesoft spun-off in early 2018.

RC-WebView combines enterprise tools with an interface that connects multiple, independent control systems into a single enterprise website. Accessed by a secure Single Sign-On (SSO), RC-WebView empowers operators to have scalable visibility and control at a glance.