This education & training roundup was compiled by Joel Don, ISA's social media community manager.
This education and training roundup covers the first quarter of 2017 and includes new courses offered by ISA Europe. Automation and control training from ISA is developed and taught by industry experts with real-world experience. Students receive comprehensive and practical instruction designed to deliver knowledge and skills that can be immediately applied in the workplace.
Cybersecurity Training
Registration closing soon for ISA's next intensive training program focused on protecting control systems from cyber attack .
Safeguard your plant’s infrastructure or 
control systems by enrolling in ISA’s System Wide Awareness Training (S.W.A.T.).
For four consecutive weeks in February, ISA will offer a series of basic-to-advanced, hands-on and highly intensive industrial data communications and cybersecurity training courses designed to better prepare you to protect your facility’s operational technology. Don’t miss this chance to gain CEUs, PDHs, and the training to perform at your best level in the event of cybersecurity crisis.
On-site Training
In addition to taking ISA classroom training at ISA headquarters, regional locations and industry events, you can also receive customized ISA training at your facility through ISA On-site Training . This option can bring any ISA course or combination of courses – along with ISA’s world-class instructors, training materials and portable laboratories – directly to you. Simply pick the time and place. Contact ISA at +1 919-549-8411 or [email protected] .
Note
: If a class date is not showing in the course offerings page or registration appears closed, contact ISA at [email protected] or call customer service at +1 919-549-8411 to get a registration update or waiting list status.
Fundamental Skills Training
Introduction to Industrial Processes, Measurement, and Control (FG07)
13-17 February (TX)
6-10 March (NC)
Technical Skills Training
Instrumentation Maintenance
Electrical Controls for the Control Systems Technician (TI23)
27 February - 3 March (NC)
Installing, Calibrating, and Maintaining Eletronic Instruments (TI25)
30 January - 2 February (NC)
6-10 February (TX)
Instrument Calibration and Documentation for FDA Regulated Industries (TI24)
23-27 January (TX)
Advanced Operation of Digital (Smart) Transmitters (TS17)
20-24 February (IL)
Industrial Communications
IT Survival Basics for I&C Personnel (TS04)
30 January-3 February (NC)
Industrial Data Communication Systems (TS06)
6-10 February (NC)
Industrial Networking & Security (TS12)
13-17 February (NC)
Control Systems
Tuning Control Loops (TC05)
23-25 January (CA)
13-15 March (PA)
Troubleshooting Instrumentation and Control Systems (TC10)
26-27 January (CA)
16-17 March (PA)
Batch Control Using the ANSI/ISA88 Standards (IC40)
6-8 March (DE)
Automation Professional Skills
Cybersecurity
Using the ISA/IEC 62443 Standards to Secure Your Control System (IC32)
20-21 February (NC)
IACS Cybersecurity Operations and Maintenance (IC37)
21-23 March (NC)
Assessing the Cybersecurity of New or Existing IACS Systems (IC33)
22-24 February (NC)
IACS Cybersecurity Design & Implementation (IC34)
15-17 March (NC)
Asset Managment and Enterprise Integration
Implementing Business to MES Integration Using the ANSI/ISA95 Standards (IC55)
9-10 March (DE)
Discrete, Sequencing, and Manufacturing Control
PLC Fundamentals for the Technical Professional (TC40)
20-24 March (NC)
Energy
ANSI/ISA-S67.04-2006: Setpoints for Nuclear Safety-Related Instrumentation (IC68P)
15-17 March (DE)
Measurement and Control
Industrial Pressure, Level, and Density Measurement (EI05)
23-24 January (NC)
13-14 March (NC)
Industrial Flow Measurement Engineering (EI10)
25-27 January (NC)
15-17 March (NC)
Plant Maintenance
Sizing, Selecting, and Applying Process Control Valves (EI30)
18-19 January (NC)
Applying Motor Controls and Drives (SP15)
27 February - 1 March (FL)
Safety
Advanced Safety Integrity Level (SIL) Selection (EC52)
27-28 February (TX)
27-28 March (CA)
Advanced Design and SIL Verification (EC54)
1-2 March (TX)
29-30 March (CA)
Safety Instrumented Systems—Design, Analysis, and Justification (EC50)
6-10 February (TX)
20-24 March (CA)
Calibration Asset Management and Data Acquisition Practices (EI42)
20-22 March (NC)
Boiler Control Systems Engineering (ES15)
6-8 February (NC)
13-15 March (TX)
Applying Instrumentation in Hazardous (Classified) Location (ES10)
8-9 February (PA)
Burner Management Systems (ES16)
9-10 February (NC)
16-17 March (TX)
Fire and Gas System Engineering (EC56P)
14-16 February (OH)
Certification and Licensure Preparation
Certified Control Systems Technician® (CCST®) Level I Exam Review Course (TS00)
20-23 February (CA)
Certified Automation Professional (CAP) Exam Review Course (EC00)
1-3 February (CA)
Certified Control System Technician (CCST) Level II Exam Review Course (TS02)
20-23 February (NC)
Certified Control Systems Technician® (CCST®) Level III Exam Review Course (TS03)
6-9 February (CA)
27-30 March (NC)
Special Training Events
Automation Engineering Survival Training (AEST)
13-17 March (CA)
Process Automation Boot Camp (PABC)
23-27 January (NC)
Automation Engineering Survival Training: Integrator Version (AESTIV)
13-17 February (IL)
Tactics for Advanced Troubleshooting Boot Camp (TATC)
20-24 February (TX)
Extreme Instrumentality: Electrical to Instrumentation Cross Training Boot Camp (XTBC)
6-10 March (TX)
Technican Training Boot Camp (TTBC)
6-10 March (CA)
Online Instructor-Assisted Courses
SIS Design, Analysis, and Justification Online (EC50E)
27 March - 19 May
Sistemas Instrumentados de Seguridad - Diseño, análisis, y justificación (EC50ESP)
23 January - 17 March
27 March - 19 May
CAP Exam Review Online (EC00E)
6 February - 5 May
Applying Instrumentation in Hazardous Locations Online (ES10E)
6 February - 31 March
Fundamentals of Industrial Process, Measurement, and Control Online (FG05E)
13 February - 5 May
Using the ISA/IEC 62443 Standard to Secure Your Control Systems Online (IC32E)
23 January - 17 March
CCST Level I Exam Review Online (TS00E)
20 February - 5 May
CCST Level III Exam Review Course Online (TS03E)
6 March - 16 June
ISA Europe
Batch Control using the ANSI/ISA-88 standards (ISA-88)
8-10 February
Implementing Business to MES Integration Using the ANSI/ISA95 Standards (ISA95)
19-20 January
23-24 March
Secure Your Control Systems (IC32)
9-10 March
Live Webinar Series
Introduction to Level Measurement (FG05W3)
25 January
Grounding in Instrumentation Systems (TI21W1)
1 February
Introduction to Flow Measurement (FG05W4)
8 February
Noise Reduction in Signal and Power Circuits (TI21W2)
15 February
Introduction to Pressure Measurement (FG0W5)
22 February
Protection Methods in Applying Instrumentation in Hazardous Locations and Enclosures: Introduction/Overview (ES10W1)
1 March
Introduction to Boiler Control (ES15W)
8 March
Protection Methods in Applying Instrumentation in Hazardous Locations and Enclosures: Intrinsic Safety (ES10W2)
15 March
Is A Burner Management System (BMS) A Safety Instrumented System (SIS)? (ES16PW1)
22 March
Protection Methods in Applying Instrumented in Hazardous Location and Enclosures: Non-incentive Devices, Purging, and Maintenance (ES10W3)
29 March
§ § § § § §
Gain significant benefits and savings. Become an ISA member. When you become an ISA member, you’ll join more than 30,000 automation and control professionals who collaborate to share ideas and insights, and solve technical challenges. And, you’ll receive up to 20 percent off on ISA products, including training courses! To review the complete array of ISA member benefits, click here or contact ISA customer service at +1 919-549-8411 or [email protected] .
Become an ISA Instructor! ISA is always looking to expand its pool of qualified subject matter experts to teach, develop or provide assessment services for our public and private clients/customers. Wouldn’t you like to make a difference and join this elite group of automation and control professionals? Click here to find out more about becoming an ISA instructor.
Have a great course idea? Click here and suggest a new ISA class.
When you become an ISA member, you’ll join thousands of automation and control professionals who collaborate to share ideas and insights, and solve technical challenges. And, you’ll receive up to 20 percent off on ISA products, including training courses. To review the complete array of ISA member benefits, click the link below or contact ISA customer service at +1 919-549-8411 or [email protected].
Click here to join ISA ... learn, advance, succeed!
