April 20, 2016 - Lanner introduces HCP-72i2 network appliance that delivers up to 36 x GbE SFP or 24 x 10GbE SFP+, while keeping one management port and one IPMI port.
HCP-72i2 is built with a full modular-design, by offering two rear-accessible Intel x86 CPU blades and three front-swappable network blades in a 2U rackmount server. The three networking I/O blades are hot-swappable through LCM control. This allows high-scalability in telecom applications as the modular blades perform offload duties.
The CPU blades are empowered by Intel Xeon processor E5-2690 v3 series CPU and C612 chipset (Haswell-EP) for extreme high-performance and data processing capability. Meanwhile, regarding data memory, HCP-72i2 supports qual-channel DDR4 at 2,133 MHz registered socket with maximum capacity up to 512GB (16 x DIMM sockets for each blade). This hardware blade design ensures ultra low latency and extreme processing power to maximize virtualization related performance. In terms of networking I/O density, HCP-72i2 delivers up to 36 x GbE SFP or 24 x 10GbE SFP+, while keeping one management port and one IPMI port. For deployments in telecom industries, HCP-72i2 is compliant with NEBS and FIPS standards.
Regarding high-availability in 24/7 operations, HCP-72i2 is designed with redundant power supply.
HCP-72i2
High Availability Rackmount 2U Telecom Network Appliance with 2 x86 CPU Blades and 3 I/O Blades
High availability, full redundancy and extreme high performance
2 CPU blades in the rear. Support up to 4 Intel Xeon E5-2690 v3 CPUs and 32x DDR4 R-DIMM
Dual mainboard communication through NTB port
3 swappable I/O blades on the front. Support up to 36 x 1GbE or 24 x 10GbE network ports in an array
