June 23, 2017 - Available from MicroPower Direct, the MD900xRU series packs 9W of regulated output power in an SIP package. These single and dual output DC/DC converters provide the features, power density and economy required by a range of board level power distribution applications.
Eighteen models operate from 4:1 inputs of 9 - 36 VDC, and 18 - 75 VDC, providing single and dual outputs of 3.3, 5, 9, 12, 15, 24, ±5, ±12 or ±15 VDC. Standard features include efficiency to 89% an input/output isolation of 1,600 VDC, a remote on/off control input and low noise operation. All models are protected for over voltage, over current and short circuit faults.
The MTBF of the MD900xRU series (per MIL HDBK 217F) is over 1.0 Mhours.
All models of the MD900xRU family are packaged in an SIP case that measures 0.86 x 0.38 x 0.44 in (21.8 x 9.6 x 11.2 mm), yielding a power density of 44W per cubic inch.
The pin out is industry standard and all case materials meet UL94-V0 requirements. Each model is specified for operation over the industrial temperature range of -40°C to +85°C with no heat sinking required. Cooling is by free-air convection.
The MD9100xRU series is a choice for a variety of board level industrial power applications.
