-
ISA provides technical resources and standards to help industrial automation professionals advance their careers and the field. We enable automation professionals worldwide to solve problems and enhance their skills by bringing people together to create new technologies and share best practices with future automation professionals.-
ISA Resources
-
Upcoming Events
-
Industry Insights
-
Consortia
-
Author Profile
Raz Nistor
59,091 Results Found
-
Feature
Does Instrument Placement Matter in Dynamic Process Control?
To control an industrial process you have must see it, and usually measure it, so that enough resolution to enable the underling picture to be seen. -
Industry Product
ams releases NanEyeM integrated Micro Camera Module (MCM) assembly
The NanEyeM features a custom multi-element lens which improves the effective resolution of the sensor. The MTF (Modulation Transfer Function) is >50% in the corners, distortion is <15% and color aberration is <1Px. -
Industry Product
ProSpection Solutions announced the PRO2300 CWI package inspection/weighing machine
This package inspection/weighing machine has top/bottom package inspection of header/side seals, printed variable data, package height inspection and check weighing in one footprint. -
Industry Product
E+E Elektronik releases EE660 laminar flow sensor
The EE660 is suitable for measurement of low air velocity down to 0.15 m/s (30 ft/min). It features an E+E hot film sensing element. Furthermore, the sensing element is resistant to contamination and has a low angular dependency. -
Industry Product
JAI announces six models of Apex Series of 3-CMOS prism color camera
The camera variations include both standard JAI green housings, as well as special white housings for systems intended for hospitals, or clinical/laboratory environments where white housings are often preferred. -
Feature
Visualising the Future of Plant Maintenance
By Nick Boughton, Digital Lead, Boulting Technology It has only been in the past five years where augmented reality (AR) and virtual reality (VR) have made their way into industrial environments. This article explains how AR and VR are re-defining plant maintenance. -
Industry Product
Antaira Technologies introduces LNP-1600G, -1802G-SFP, and -2004G-SFP series of unmanaged PoE switches
These product series have an IP30 rated metal casing design that can support DIN-Rail and wall mountable orientations. The devices provide a dual redundant power input range of 48 to 55VDC with an overload current and reverse polarity prevention. -
Industry Product
Trihedral announces release of VTScada 11.3
Trihedral’s VTScada 11.3 works to replace aging SCADA software by allowing users to retain a complete view of their process history. This utility imports historical data from applications based on other brands of SCADA software. -
News
Festo announces partnerships with Power/mation and Heitek Automation
Power/mation has warehouses and sales offices in Illinois, Iowa, Minnesota, Nebraska, North and South Dakota, and Wisconsin. Heitek Automation will now be distributing the full line of Festo pneumatic and electric automation components and systems in Arizona, Colorado, and New Mexico. -
News
FDT Group announces full-platform independence for FDT IIoT Server (FITS) architecture
With built-in security protecting valuable information and operating data, the FITS platform will enable cloud, enterprise, on-premise, and a single-user desktop deployment method meeting the needs of the process, hybrid and discrete manufacturing sectors. -
News
Vortec announces updates to online heat load calculator
This online tool is designed for a range of industries and applications, including industrial/manufacturing, food, chemical, water and other processing environments, oil refining and petrochemical processing, and others that have become dependent on microprocessors, PLCs, and VFDs. -
Industry Product
Inspekto releases S70 Autonomous Machine Vision system
This system offers a user interface designed to be installed directly by the shop-floor employee. This means that no systems integrator is required at any step of the short set up process, and at any time later. -
Industry Product
Microchip Technology introduces DSC613 MEMS clock generator
The DSC613 family is a single-chip solution that integrates a MEMS resonator and two low-power Phase-Locked Loops (PLLs) into a 6-pin DFN package as small as 1.6 mm x 1.2 mm. -
Industry Product
Phoenix Contact introduces Industrial Case System (ICS) family of housings
The ICS enclosures are available in nine widths, six heights, and five depths. They feature standardized device connections such as RJ45, D-SUB, and USB, as well as a variety of PCB terminal block or connection options. -
Feature
How to Increase Plant Efficiency and Safety with Level Measurement Technology
By Patricia Mattsson, Emerson Automation Solutions The widespread departure from manual measurements to automated solutions has helped improve worker efficiency while providing more accurate measurements. New level measurement technologies can do even more. -
News
ABB announces support for OPC UA over TSN communication standard
ABB will take up a designated seat on the board of the OPC Foundation in 2019 to further help accelerate development of the new technology. -
FeatureWhy Companies on Analog Networks are Missing Out on the Benefits of Cloud Computing and IIoT
Despite IIoT, Industrial Ethernet and Industry 4.0 initiatives, digital networks are still not used everywhere. Organizations stuck in an analog world should look carefully at what they are missing. -
News
OPC Foundation announces standardization and harmonization initiative for OPC UA including TSN enabled Ethernet networks
The goal of this initiative is to deliver an open, cohesive approach to implement OPC UA including TSN and associated application profiles. This will advance the OPC Foundation providing vendor independent end-to-end interoperability into field level devices for all relevant industry automation use-cases. -
News
CNCMachines.net announces $2,000 CNC scholarship
The competitive award is for students enrolled in a CNC machinist, CNC operations, engineering or manufacturing certificate or degree program. As part of the award process, the scholarship recipient's school will also recieve a $500 donation made to their machining or manufacturing department. -
News
OPC Foundation announces standardization and harmonization initiative for OPC UA including TSN enabled Ethernet networks
The goal of this initiative is to deliver an open, cohesive approach to implement OPC UA including TSN and associated application profiles. This will advance the OPC Foundation providing vendor independent end-to-end interoperability into field level devices for all relevant industry automation use-cases.