-
ISA provides technical resources and standards to help industrial automation professionals advance their careers and the field. We enable automation professionals worldwide to solve problems and enhance their skills by bringing people together to create new technologies and share best practices with future automation professionals.-
ISA Resources
-
Upcoming Events
-
Industry Insights
-
Consortia
-
Author Profile
Rob Ruber
59,091 Results Found
-
News
Bronkhorst High-Tech BV announces FLUIDAT database of 1800 gas and liquid properties
This database, called FLUIDAT, is used by the company for configuration and calibration of its portfolio of flow meters and controllers, and for calculating pressure differences, valve seats, etc.. -
Feature
3 Predictions for Industrial Manufacturing Trends in 2019
By Stefan Reuther, COPA-DATA Industry 4.0, the Fourth Industrial Revolution or the Industrial Internet of Things (IIoT). Regardless of the phrase used to describe digitalization in manufacturing, there’s no denying that a shift has already taken place. This article gives three predictions for industrial automation in 2019 — no buzzwords included. -
Feature
A Beginner's PLC Overview, Part 4 of 4: PLC Ladder Logic
You may become nerdy programming PLCs, but once you get into it, you won't care. This post is about programming PLCs. Specifically programming PLCs with Ladder Logic. This is what I've done almost daily for my job for the past several years. -
Industry Product
Dynatrol introduces CL-10GP Proportional Level Detector
The Dynatrol CL-10GP Proportional Level Detector and EC-103C(G) Control Unit monitor and control a precise liquid level range due to its proportional output signal. -
Industry Product
Moticont releases GVCM-051-025-01 linear voice coil motor
This voice coil motor has a force to size ratio of 5.3 lbs (23.5 N) continuous force and 16.7 lb (74.4 N) of peak force at 10% duty cycle with a housing measuring 2.00 in. (50.8 mm) dia. x 1.00 in. (25.4 mm) long. -
News
Measurement, Control & Automation Association (MCAA) announces their 2019 Board of Directors
Founded in the early 1940’s, MCAA has been serving industry organizations for seventy-five years. MCAA is the trade association for manufacturers and distributors of instrumentation and systems associated with the Measurement, Control & Automation Industry. -
News
IHS Report: Process industry markets up four percent in 2017
The top process industries grew at a faster rate than the top discrete industries in 2017, and this trend continued in 2018, according to the “Low Voltage Motors Report” from IHS Markit. -
News
Industrial Internet Consortium (IIC) and GlobalPlatform announce IIoT liaison
Under the agreement, the IIC and GlobalPlatform will work together to align efforts to maximize interoperability, portability, security and privacy for the industrial Internet. -
Industry Product
Integration Objects releases OPC Client for MQTT
OPC Client for MQTT leverages MQTT protocol and OPC standard to link devices and sensors with the Cloud. In fact, it collects real-time data from multiple OPC DA servers. -
Industry Product
Hitachi Solutions America introduces version 2.0 of the IoT Service Hub
The latest release includes efficiencies designed to strengthen the turnkey IoT platform’s real-time monitoring, rules-based analytics, and autonomous decision-making capabilities. -
News
Hilscher announces support for PROFINET @ TSN technology
The support for PROFINET @ TSN technology will be on its portfolio of netX multiprotocol network controllers. netX is a single-chip ASIC that provides a master and/or slave communication connection to all Industrial Ethernet systems, fieldbuses and Industry 4.0 protocols. -
News
Siemens helps Chinese steel facility implement autonomous stockyard management system
With autonomous operation of stackers and reclaimers, Binxin Steel will be able to achieve full utilization of the stockyard area, and optimized energy consumption. Siemens’ automation solutions secure autonomous operation of the end customers’ stackers and reclaimers. -
FeatureWebinar Recording: PID and Loop Tuning Options and Solutions for Industrial Applications
Learn the benefits of knowing your process and PID capability, with a focus on process behavior, loop objectives and different industrial applications. -
Industry Product
R+E Automation introduces BCT-200 solution for blood collection tube manufacturing
The BCT-200 can be used to manufacture and package both vacuum and non-vacuum blood collection tubes. The machine can therefore dispense common additives, such as gel, EDTA.K2, EDTA.K3, lithium herapin, trisodium citrate, and more. -
Industry Product
Curtiss-Wright’s Sensors & Controls Division announces FTP160 Exlar electric press actuator
With continuous force ratings to 200 kN (45,000 lbf) pressing, and speeds to 401 mm/sec (15.8 in/sec), and stroke lengths from 150 mm (6 inches) to 900 mm (36 inches), the FTP Series can be applied across a wide range of pressing applications. -
News
MonarchFx announces Warren Bishop as Operations Director
Previously, Bishop was the Vice President of Finance, Planning, Analysis, Reporting, and Process Improvement for Macy’s Logistics. He also has experience as the Senior Vice President of Logistics at Levitz Furniture, Vice President of Supply Chain at Giggle, and Director of the East Region Distribution at Toys R Us. -
Feature
The Rise of Servitization for Manufacturers
By Nick Boughton, Boulting Technology Engineering giant Rolls Royce pioneered servitization in 1962 with its Power-by-the-Hour approach to jet engine maintenance management. This article discusses what servitization can offer other industries including high-volume, low-margin manufacturing. -
Industry Product
Optimal-Engineering Systems releases AU200-100x100 XY stages
The linear travel of the X and Y axes is 100mm x 100mm (3.937 in. x 3.937 in.), and the resolution of each axis is 20 microns(non-micro-step) or 1 micron(20 micro-steps per step motor driver in use), repeatability is 2 microns, and the positional accuracy is 3 microns. -
Industry Product
e-con Systems announces See3CAM_CU55 5MP USB 3.0 Camera
With S-mount lens holder, the See3CAM_CU55 is suitable for applications such as smart surveillance, digital microscopy, document scanning cameras, optical character recognition, smart parking lot management, microscopy/magnification, drones etc. -
Industry Product
Reliable Controls releases RC-WebView 3.12
RC-WebView combines enterprise tools with an interface that connects multiple, independent control systems into a single enterprise website. Accessed by a secure Single Sign-On (SSO), RC-WebView empowers operators to have scalable visibility and control at a glance.