-
ISA provides technical resources and standards to help industrial automation professionals advance their careers and the field. We enable automation professionals worldwide to solve problems and enhance their skills by bringing people together to create new technologies and share best practices with future automation professionals.-
ISA Resources
-
Upcoming Events
-
Industry Insights
-
Consortia
-
Author Profile
Robert Lu
59,091 Results Found
-
News
Rockwell Automation to focus on digital transformation and Industrial IoT at Hannover Messe 2017
Rockwell Automation will be showcasing the technologies, solutions and services that can help companies successfully and securely take advantage of the Industrial Internet of Things (IIoT) at Hannover Messe 2017, April 24-28 in Hannover, Germany. -
News
ISA to hold pharmaceutical-focused meeting on industrial cyberattack protection
The meeting event, “Pharmaceutical Cybersecurity Convocation: A Critical Executive Dialogue,” will be held at the Sheraton Framingham Hotel & Convention Center in Framingham (Boston area), Massachusetts, in conjunction with ISA’s Food & Pharmaceutical Industries Division (FPID) Symposium. -
Feature
The Cost of Functional Safety for Food Processing
By Jorgen Saxeryd, ABB In 2014 in the UK, a large food manufacturer had to pay a £800,000 fine after a serious industrial accident. This article explains how safety procedures must be developed in food processing plants. -
Industry Product
E+E Elektronik introduces EE360 moisture-in-oil transmitter
The EE360 moisture in oil transmitter from E+E Elektronik is dedicated for reliable monitoring of lubrication, hydraulic and insulation oils as well as diesel fuel. -
Industry Product
Micro-Measurements announces ZWH-, ZWN-, and ZWP-Series of free-filament wire strain gages
The free-filament wire strain gages allow for measurements of both dynamic and limited-static strain. The gages, offered as the ZWH-, ZWN-, and ZWP-Series, can accurately measure dynamic strain values in temperatures up to +1900°F (+1038°C), as well as limited-static strain to +1500°F (+816°C). -
Case Study
Advanticsys wireless sensors help to reduce UK traffic pollution
The project aimed to test the feasibility of developing an integrated data platform for Chester city centre. The focus was on linking a novel air quality network of low cost wireless sensors with the traffic management within the city centre to alleviate air pollution ‘hot spots’ caused by queuing traffic. -
News
Productive Robotics announces acquisition of Cobots Guide
Operating independently from Productive Robotics, Inc, Cobots Guide will advocate for the collaborative robot industry to encourage broad knowledge and acceptance of collaborative robots in manufacturing and non-manufacturing practice, education and public policy. -
Case Study
Bedrock Automation boosts industrial control for Arkansas town's water and sewer system
The Bedrock controller is part of an integrated plantwide SCADA system. Users connect to that system via Ignition software from Inductive Automation. Ignition is an industrial applications platform that coordinates control and data acquisition for all plant PLCs and remote transfer units (RTUs). -
Industry Product
Yokogawa release CENTUM VP R6.04 integrated production control system
CENTUM VP is a production control platform for a variety of process operations. CENTUM VP solutions encompass all stages of the plant lifecycle, from design, engineering, installation, and startup to full operation. -
Industry Product
Red Lion introduces Graphite Edge controller
Red Lion’s Graphite Edge Controller includes Crimson 3.0 software featuring Crimson Control, providing customers with the ability to interconnect devices using over 300 industrial protocols and use IEC 61131 programming languages – such as ladder logic, function block and structured text – to solve specific application needs. -
Case Study
ABB chooses Omnify PLM software to enhance design processes
ABB Drives and Controls was lacking a component information management system with a centralized database for their Printed Circuit Board Assembly (PCBA) components and the mechanical parts that included PCBAs. They selected Omnify Empower PLM -
News
Konrad and three NI Alliance partners join to develop autonomous vehicle test solutions
The companies are leveraging their expertise in the field of Advanced Driver Assistance Systems (ADAS), sensor fusion, Hardware in the Loop (HiL), V2X communication, GNSS simulation and data management to provide a one stop solution for fully autonomous vehicles. -
News
Honeywell Process Solutions introduces UniSim eLearn connected-learning solution
Part of the Honeywell Connected Plant intiative, UniSim eLearn is hosted in the cloud and revolutionizes access to operator training simulation (OTS). It’s a key tool in delivering effective operator competency management. -
FeatureDC Servomechanism Parameter Identification: Closed-Loop Approach
Closed Loop Input Error (CLIE) approach for on-line parametric estimation of a continuous-time model of a DC servomechanism functioning in closed loop. -
Industry Product
Axiomtek introduces P1197E-500 19" touch panel computer
The CE-certified 19-inch expandable human machine interface supports up to 32 GB system memory of dual-channel DDR4-2133 to deliver computing capability. -
Case Study
HighJump's 3PL WMS solution brings Canadian frozen storage company to the cloud
HighJump’s cloud solution is designed to simplify each step of the supply chain while assuring levels of service through system uptime, response time and security. -
Industry Product
AMS/Acam introduces TDC-GPX2 time-to-digital converter
The device delivers up to 70 mega-samples per second – for drones, radar, LIDAR, PET scanner, automatic test equipment (ATE), photon counting and spectroscopy applications. -
Industry Product
Zero-Max releases Model 650 overhung load adaptor
OHLA applications include pump drives, forestry shredders, recycling systems, fan drive for heat exchanges, conveyor drives, off road construction machinery, and similar heavy duty applications. -
Industry Product
ULVAC introduces NA-1500 dry etching system for 600mm advanced packaging substrates
While there are many 200mm/300mm wafer dry etching systems in the market today, there was no dry etching system for 600mm substrate, providing for a uniform Descum process and Ti etching process. -
Industry Product
RS Components announces addition of 39 products to its range of laser-diode modules
The products include interchangeable pattern optics to enhance the existing LaserLyte Flex range for the projection of lines, crosses and grids. A selection of lenses and focus keys allows users to tailor modules to fit optical requirements by improving beam divergence or by changing spot/beam dimensions.