The drive is powered by single-phase 120 VAC which generates a nominal 160 volt DC internal bus voltage capable of driving NEMA 34 and 42 frame step motors.
February 24, 2017 - The STAC6 offers anti-resonance that is designed to ensure performance of the step motor. The drive is powered by single-phase 120 VAC which generates a nominal 160 volt DC internal bus voltage capable of driving NEMA 34 and 42 frame step motors.
Features include:
- ATEX and IECEx certified for Class I, Zone 2 locations
- UL certified for Class 1, Div 2, Group C & D locations
- HazLoc Step Motor Drive
- HazLoc certified for USA, Canada, Europe and Middle East
- Advanced anti-resonance algorithm
- Torque ripple smoothing
- Microstepping to 51,200 steps/rev
- Encoder feedback option for enhanced system accuracy using Stall Detection and Stall Prevention
- Designed for use with NEMA 23, 24, 34 and 42 frame step motors
- 7 digital inputs, 3 digital outputs, all optically isolated
- 2 analog inputs, +/-10 volt range
- Supply Voltage: 94-135 VAC, 50/60 Hz, single-phase
- Input Power: 120 Vac, 1 Phase, 1.67 A (rms)
- Output Power: 120 Vdc, 1 phase, 4.24 A (rms), Continuous Duty Rating
- Control Modes: Streaming Commands, Analog Positioning, Encoder Following, Q Programming
- Output Current: 0.5-6.0 A/phase, peak-of-sine
- Communication Ports: RS-232, RS-485
- Idle Current Reduction: 0-100%
- Setup Method: Software setup
- Dimensions: 6.35 x 4.66 x 2.31 inches
- Weight: 32 oz.
- Ambient Temperature Range: -40 to +55 °C (-40 to +131 °F)
- Ambient Humidity: 90% max, non-condensing
