Electromagnetic safety lock control with 936 N force and 100% stainless steel No power or under-voltage locking on machine casings
- Machine protection closing control for harsh environments
- Antimicrobial handle available
- Level of performance with AWAX controller: up to PL = e
- Safety category: up to 4 with AWAX controller or PLC SIL 3
- Time before dangerous failure: MTTFd = 100 years
- Maximum detection activation distance: 2 mm
- Holding force: up to 936 N (ref. version + OX-R) or up to 820 N (ref. version + OX-E)
- Safety contacts/diagnostics: 2 x NO 400mA max/24V redundant and
- 1 x PNP 250mA
- Detection encoding: mono-code inviolable
- Reset: automatic or controlled (ref. + OP)
- Housing mount: 4 tamper-proof M6 screws (optional ref: BH6)
- Handle attachment: 2 M8 screws
- Mounting position: 1
- Casing material: 316L stainless steel mirror polished (OX version)
- Suction cup material: Magnetic INOX (ref. + OX)
- Electrical Connection: 50cm PUR cord with M12 connector
- Water resistance: IP 67/68
- Temperature: -25°C to +50°C (thermal protection for suction cups in case of overheating due to a persistent command)
- Marking: laser engraving with mechanically punched serial number for
- permanent traceability
