Articles and News

The award is for a research project that quantified the performance of an ISA100 Wireless based safety system at an offshore operational site.

HMS says Industrial Ethernet is growing faster than before and now accounts for 38% of the market. EtherNet/IP is in first place within industrial Ethernet globally.

By Glenn Schulz, Managing Director, FDT Group FDT Technology holds the key to integrating a wide range of devices and networks in today’s complex process automation architecture. Ongoing development of this technology, driven by growing instrumentation supplier involvement, is enabling end users to realize the true potential of decentralization, transparency, integration, and a unified view of all data and functions within the manufacturing enterprise.

By Bill Lydon, Editor "Industrial Automation Absorbed by IT," may be the future headline if the industrial automation community does not make a commitment to multivendor, open-interoperability, and Internet of Things (IoT) technology. If this comes to pass it may not be the optimal solution for industrial automation effectiveness.

Sixnet series RAM industrial cellular RTUs now provide high-speed 4G LTE network support in Japan.

By Moazzam Shamsi, Emerson Process Management The self-configuring capabilities of WirelessHART networks simplify the installation and configuration of WirelessHART field devices. This article walks through the steps required to successfully install and configure a WirelessHART network.

Elite adds Vibration Monitoring and Profibus Network health checks to its support services.

The OPC standard allows the EyeSens sensors and EyeVision software to function as OPC server.

The SmartWatchWeb Radio Frequency (SWWRF40) Steam Trap Monitor checks for gas and steam leaks, temperature, pressure and other relevant information related to valves and the steam system.

By Punya Prakash and David Zaucha, Texas Instruments To date, the implementations of EtherCAT slave node have largely been dominated by hardware intensive solutions used to perform on-the-fly real-time processing and synchronization. Recent advances in technology have created programmable system-on-a-chip (SoC) devices that offer very tangible equipment costs savings, versatility and longer life cycles to industrial systems users.

By Joy Weiss, Dust Networks Wireless sensor networks must meet a high bar for smart, security and reliable wire-free operation over many years. These stringent requirements can be met with existing and emerging wireless mesh networks standards.

The acquisition will enhance PTC’s portfolio of Internet of Things (IoT) technology, and accelerate the company’s entry into the factory setting and Industrial IoT (IIoT).

The ISA100 Wireless Compliance Institute certified the STAPS ISA100 Wireless Steam Trap Monitor from Spirax Sarco.

By Wim Pessemier, KU Leuven Information modeling, or the ability to express not only data but also the meaning of data, is a key concept in the quest to make systems more intelligent, more autonomous and more evolvable.

ZigBee and EnOcean will combine EnOcean energy harvesting wireless solutions with ZigBee 3.0.

This specification describes the mapping of the Sercos information model to OPC UA so that functions and data of Sercos devices are made available and accessible via OPC UA.

Informatica, Splunk, and ThingWorx are among alliance members committed to meeting market potential for Internet of Things (IoT) with industrial automation data.

The AIM ST6700 has successfully achieved ISA100 Wireless certification.

The CC-Link Partner Association (CLPA) and PI (PROFIBUS & PROFINET International) will collaborate with the objective of promoting and disseminating the use of open industrial networks.

Stack allows a standard Ethernet network to be used for deterministic data exchange based on the emerging IEEE Time-Sensitive Networking (TSN) standard.