Articles and News
3,860 Results Found
-
ABB to maintain offshore wind farms
ABB will provide maintenance services for the grid connections of offshore wind farms located in the North Sea off the coast of Germany. -
Manufacturing technology consumption up 62.4% in 2010
August U.S. manufacturing technology consumption totaled $246.42 million, according to AMT. -
Davis Instruments publishes V76 Sourcebook
Sourcebook provides a comprehensive selection of test, measurement, control, and calibration equipment. -
Tridium to supply NiagaraAX to Environmental Systems
Niagara Framework is integrating lighting, HVAC, continuous commissioning, security, fire monitoring and alarms at Environmental Systems' new headquarters building. -
Earn a BEAP from ASHRAE
BEAP certification program recognizes individuals’ ability to audit and analyze residential, commercial and industrial buildings. -
Thru-Panel Voltage Detection Fits NFPA 70E and CSA Z462
By Philip Allen, Grace Engineered Products Is a thru-panel voltage detector a safety device or just another electrical gizmo? The answer is both. -
Institution of Engineering and Technology Joins Automation Federation
The two organizations signed a formal agreement to collaborate on efforts to advance and grow the automation profession. -
What Makes MV Indicators Suitable for Electrical Safety?
By Grace Engineered Products Medium voltage indicators (2K-43KVolts) offer positive benefits because they keep workers away from voltage and provide an answer to the 'Is there voltage?' question. -
National Instruments Appoints Alex Davern Chief Operating Officer
Davern joined National Instruments in 1994 and has been serving as CFO and senior vice president of manufacturing and IT operations since 2002. -
Allied publishes 2011 Catalog
The 2011 Catalog showcases more than 120,000 products from over 300 suppliers. -
ISA Announces ISA Automation Week 2011
ISA Automation Week 2011: Technology and Solutions Event will be held at the Arthur R. Outlaw Mobile Convention Center in Mobile, Alabama, USA, on 17-20 October, 2011. -
FIRST, Automation Federation, and ISA Promote STEM Education
The three will promote the importance of science, technology, engineering, and math (STEM) education for students in kindergarten through high school (K-12). -
Addressing the Myths of Model Predictive Control (MPC)
By Don Morrison, Honeywell Process Solutions Key misconceptions are based on the common shortcomings of traditional model predictive control: complexity of configuration, speed of execution, interpretation of noise in the system, and over-active movement of the final control element. But an intelligently implemented MPC strategy can result in increased plant efficiencies over PID. -
European Funds Drive SCADA Market says Frost & Sullivan
Major investments in the electric utility and water and wastewater sectors will drive the European supervisory control and data acquisition (SCADA) market. -
Semaphore Wireless Monitor Achieves ATEX Zone 1 Approval
ATEX Zone 1 approval allows the T-BOX WM Wireless Monitor to operate in an atmosphere where a mixture of air and flammable substances exist. -
Understanding Your Choices In Flowmeter Calibration
By Mubeen Almoustafa, Flow Dynamics Inc In order to be confident that a meter is accurately measuring the flow volume or mass, it must be recalibrated on a periodic basis. -
Refinery in Kuwait converts 1,750 steam traps
Shauiba Refinery in Kuwait converted 1,750 mechanical traps to GEM Venturi Orifice design. The hot condensate header pressure dropped from highs of 175 psig to just 90 psig. -
ABB publishes guide for selecting magmeter liners and electrodes
Technical reference guide provides comprehensive information and data for selecting magmeter liners, electrodes, and grounding rings. -
FCI Model GF90 Flare Gas Flow Meter meets new US MMS Regulation
A recently enacted US Minerals Management Service (MMS) mandate stipulates that all domestic US offshore rigs processing more than an average 2000 bopd must install flare/vent gas flow meters. -
Emerson reduces barriers to productivity
At the 2010 Emerson Global Users Exchange conference, Emerson demonstrated the latest results of its commitment to using innovative technology to reduce the complexity of customers' jobs.
