Articles and News
5,245 Results Found
-
Perpetuum powers National Instruments
The National Instruments NI WSN-3226 Wireless Measurement Node can be powered by Perpetuum’s vibration energy harvester technology. -
Advantech Remote I/O Receives BACnet Certification
BAS-3000BC series of remote I/O modules have received BACnet certification, approved and listed by BACnet Testing Laboratories (BTL). -
Easier M2E (Machine to Enterprise) Integration
Automation.com, May 2011 By Roy Kok Over the years, we’ve had sensor upgrades, improved controllers, better operator visibility, data archiving and analytics, and now we have enterprise integration for improved material management, corporate agility, regulatory compliance and a host of other features. -
MatrikonOPC to supply OPC servers to IFCS
IFCS will be integrating the OPC Servers with its DABO (Buildings Diagnostic Agent for Building Operation) – a tool that analyzes and stores all data read by the centralized control system. -
Softing signs AWC as a Distributor
AWC operates 24 locations in 9 states (Louisiana, Alabama, Mississippi, Arkansas, Georgia, Texas, Tennessee, Oklahoma, and Florida) and employs over 285 people. -
GarrettCom promotes Lee House to Managing Director
House, who joined GarrettCom in 2008 as Vice President of Engineering, most recently served as GarrettCom’s Executive Vice President and Chief Technology Officer. -
National Instruments to Acquire AWR for $58 million
WR is a supplier of electronic design automation (EDA) software for RF and high-frequency components and systems for the semiconductor, aerospace and defense, communications and test equipment industries. -
Trends and Products from Hannover Messe 2011
Automation.com, May 2011 By Bill Lydon, Editor The size of Hannover Fair can be overwhelming but there were industry and technology trends reflected in products and presentations at the event. Here are some specific examples for illustration - in most cases there are many more companies that have products supporting these trends. -
Brainboxes lance un site Web français
Il suffit de taper fr.brainboxes.com dans votre navigateur ou cliquez sur le drapeau de langue en haut à droite de la page en langue anglaise. -
ODVA appoints leaders for 2011-2012
Appointments were made in March 2011 at ODVA’s annual meetings of its board and of its members in Litchfield Park, Ariz. -
From the Field - ABB Automation and Power World 2011
Automation.com, May 2011 By Bill Lydon, Editor Here are a few highlights from ABB Automation & Power World 2011. The event attracted a record number of participants, totaling more than 4,200, and featured over 400 educational workshops and hands-on training sessions, over 45 customer-presented case studies, and an exhibition of ABB and partner products. -
Dust Networks announces SmartMesh IP evaluation kits
The standard SmartMesh IP Evaluation Kit provides everything needed to demonstrate mesh network performance, data monitoring, digital actuation, and event notification. -
Apprion develops Wireless Application Site Plan for BASF FINA
Apprion conducted an on-site survey, which included RF spectrum analysis, various grid simulation output with signal power levels and a technical evaluation of the site’s infrastructure. -
Overcoming barriers to wireless adoption
By Adrienne Lutovsky, ProSoft Technology Questions regarding security, reliability and capacity of wireless continue to prevent conservative end users from reaping its benefits. Can these be overcome? -
Networks diagnostics made easy - Monitoring PROFINET and PROFIBUS Networks
Automation.com, May 2011 By Dr. Christine Eckert SZST Salzgitter Service und Technik GmbH thoroughly tested Trebing + Himstedt’s TH SCOPE unified diagnostics solution at a SIL-based installation in a steel mill. -
Multivendor Ethernet Safety Protocol - Noble Goal
Automation.com, April 2011 By Bill Lydon, Editor The openSAFETY standard supporters are posing an interesting idea to the industry - use a single Ethernet-based safety protocol, openSAFETY, on all automation applications regardless of industrial Ethernet protocol used for controls. -
FieldServer DNP3 Gateways pass DNP Level 2 Conformance Tests
DNP3 protocol was originally developed for interoperability between substation computers and RTUs but is now also widely used in the water/wastewater, transportation and oil/gas industries. -
EnOcean interoperable with TCP/IP
EnOcean Alliance announced that its wireless, battery-less energy harvesting sensors and associated control systems are now fully interoperable with TCP/IP. -
Energy Optimization - Creating another Tower of Babel?
Automation.com, April 2011 By Bill Lydon, Editor Energy has become a hot topic with vendors and standards organizations, many of which are offering and creating solutions for energy users. -
Identifying Automation System Tribbles
Automation.com, April 2011 By Roy Kok How did Scotty know? How do you know when your systems are normal? Are the Dilithium crystals at their proper temperature and vibrational frequency for this Warp Speed and area of space? Could he be sure he caught every last Tribble, and none are blocking the cooling ducts to the Anti- Matter Drive?
