Articles and News

The control system migration of the mill’s Flakt Dryer machine from a mixture of legacy ABB MOD300 and Allen Bradley PLC’s to PlantPAX was the fifth PlantPAX control system installed by GPA in the Pulp & Paper industry specifically.

Being a sister event of the SPS IPC Drives from Nuremberg Germany, SIAF will showcase a variety of products from its related sectors including robotics, machine vision, sensors and measurements, connectivity systems, drives systems and control technologies, bringing a one-stop marketing and knowledge exchange opportunity to the Chinese industry.

Following the acquisition, Mr. Massimo Banzi becomes the new Chairman and CTO of Arduino. Dr. Fabio Violante will be appointed as the new CEO, replacing Mr. Federico Musto who will pursue other opportunities outside Arduino AG.

The specification “PLCopen Safe Motion” version 1.0 – official release – is now available on the PLCopen website for downloading. This new solution is based on an existing functionality as already specified in PLCopen Safety: SF_SafetyRequest.

5ME’s multi-patented cryogenic machining process is a technology designed to enable higher metal removal rates and longer tool life by delivering liquid nitrogen at 321°F through the spindle/turret, cutter body, cutting tool, and directly to the cutting edge.

The operating system that supported the Tyson Foods' Wisconsin plant's human machine interface (HMI) application was facing obsolescence. The new solution is based on the Rockwell Automation Integrated Architecture system that incorporates both the Logix control platform and FactoryTalk production management software

The modular CK design enabled the operator to tailor the actuator specification to precisely match the requirements of the application. The selection of CK actuators complete with Centronik digital control units required only the provision of a mains electricity supply to provide automation of the previously hand operated valves.

An R&D program has been initiated there to discover new uses for the TC with help from a new automated process for winding coils.

By Markus Brettschneider, ABB Food and Beverage This article explains how food plant managers can add a similar level of connectivity to retrofit most motors with smart sensors to bring their plants to the digital age.

For this project, ABB will supply the production hoist and all related mechanical and electrical systems at the South shaft of the K3 mine. Mechanical equipment for the friction hoist will include ABB’s synchronous motor and ABB’s SIL 3 rated Safety Brake System to provide safety, security and reliability for hoist operation.

Okuma’s donation of $100,000 in machine tools to the engineering technology programs at Central Piedmont Community College (CPCC), enables students to gain valuable hands-on machining experience and the skill set needed to enter the manufacturing workforce

PCB's accelerometers were used by Lockheed Martin to measure the dynamic environment of the instrument platform in flight, and to characterize that environment to improve the interpretation of instrument data.

Nemaska Lithium is developing the Whabouchi spodumene deposit to meet the growing global demand for lithium batteries to be used in electric vehicles and energy storage systems, as well as in various consumer electronics.

The AMCI by IDEC product line includes controllers, stepper motors, and integrated solutions for the FC6A MicroSmart PLC. Integration is a combination of two or more components that usually make up a system.

The IPS Corpus Christi Service Center is one of seven IPS service centers supporting industry in the Gulf Coast Region including Houston, TX, Beaumont, TX, Sulphur, LA, Shreveport, LA, Birmingham, AL and Dothan, AL.

In the new "Arena of Digitalization" covering an area of more than 800 square meters, Siemens is now showing customers and partners how digitalization is used in metalworking and motor production and what results can be achieved with it.

This most recent acquisition strengthens Ritter's commitment to providing engineered hydraulic and pneumatic products to its customer base in the greater Detroit area.

AES needed an expert integrator who knew the demands of recycling firsthand, with an engineering staff that could coordinate the equipment and automate the entire facility. Vecoplan, an industry provider of building and automating recycling technology, knew it could take on that project.

Of the show’s 225,000 attendees (up from 217,000 in 2015 as the most recent comparable event), more than 75,000 came from abroad. The next HANNOVER MESSE will run from 23 to 27 April 2018, with Mexico as its official Partner Country.

Exosite’s combination of Murano and Exchange was designed to help industrial manufacturers like Parker develop a centralized approach to IoT implementation that focuses on standardization, reuse and internal collaboration.