![Using OPC Technology to Study Advanced Process Control [Technical]](/o/adaptive-media/image/7947028/small-576/how-to-create-working-information-capital-process-industry-enterprise.jpg?t=1772478412113)
©2026 Automation.com, a subsidiary of the International Society of Automation.
-
ISA provides technical resources and standards to help industrial automation professionals advance their careers and the field. We enable automation professionals worldwide to solve problems and enhance their skills by bringing people together to create new technologies and share best practices with future automation professionals.-
ISA Resources
-
Upcoming Events
-
Industry Insights
-
Consortia
-
Articles and News
1,658 Results Found
-
Compensation for Cascade Dead Zones in Proportional Control Valves [technical]
The cascade dead zones problem in a typical two-stage proportional directional control valve is analyzed and a cascade dead zones model is developed for the main stage spring constant. -
AutoQuiz: What Is the Purpose of the Proper Grounding of Electrical Devices?
Proper grounding provides safety, over-current protection, electrical noise reduction, lightning protection, and static electricity reduction. -
How FDT Technology Optimizes IIoT Strategies for All Industrial Sectors
FDT technology integrates any device, system, or network in an automation architecture. It leverages IIoT and Industry 4.0 to help realize the true potential of decentralization, interoperability, and -
Webinar Recording: Loop Tuning and Optimization
Learn about the importance of process optimization and how to achieve it through better PID control from members of the ISA Mentor Program. -
AutoQuiz: How to Calculate the Pressure Recovery Factor for Valves
Pressure recovery factor is the increase in fluid static pressure that occurs as fluid moves through a valve from the vena contracta to the valve's outlet and downstream piping. -
How to Optimize Industrial Evaporators
Model predictive control software identifies the dynamics and automatically incorporates them into the industrial evaporator controller. -
![Using OPC Technology to Study Advanced Process Control [Technical]](/documents/d/acom/how-to-create-working-information-capital-process-industry-enterprise.jpg-2)
Using OPC Technology to Study Advanced Process Control [Technical]
Research focus on the use of OPC technology for the study of distributed control systems as a cost effective and flexible research tool for the development and testing of advanced process control techn -
With an Experienced New Executive at the Helm, ISA Is Confident, Secure in Its Direction
ISA's new Executive Director Mary Ramsey is a dynamic, experienced leader with a deep understanding of industrial automation, process control, and related industries. -
AutoQuiz: What Are the Four Key Activities in the Maintenance Cycle of a Control System?
Documentation of the "as left" condition of the control system is a basic requirement for all maintenance, calibration, commissioning, and testing tasks. -
Improving the Performance of a Model Predictive Controller for Regulatory Control [Technical]
Automation engineers investigate several commonly used control structures such as “Cascaded PI controller,” “DMC cascaded to PI” and “Direct DMC.” -
The Three Most Desirable MRP Software Features for Manufacturers
For manufacturers, material requirements planning (MRP) software is one of the key elements to running a smooth manufacturing operation. -
AutoQuiz: What Are Multiple Independent Protection Layers in Relation to Industrial Safety?
A consequence of the concept of multiple independent protection suggests minimization of risk occurs when safety instrumented systems are completely independent from process control systems. -
How to Calibrate a Thermocouple Temperature Transmitter
For critical industrial measurements, place the thermocouple in a bath or dry block or cross check the reading against another thermocouple. -
Three Decades of Life with Pipeline Leak Detection
At a time when detecting large industrial pipeline leaks within the same day was challenging, new technology that could detect small leaks and any leak quickly was exciting. -
AutoQuiz: What Is the Response in Level Control System If the Process Liquid Medium Changes?
For a capacitance probe installed in a metal tank, the measured level is proportional to the measured capacitance between the level probe (one capacitor plate) and the tank wall (second capacitor plat -
How the IIoT Puts Factory Electrical Systems at Risk and What You Can Do About It
Factories of the future will demand advanced circuit protection technology to keep everything connected. -
Redefine and Transform How You Execute Automation Projects
Improving on what has always been done can only result in incremental improvements at best or continued complications. We have to redefine and transform how we execute automation projects. -
AutoQuiz: How to Determine Cause of the Apparent Discrepancy in Flow
Periodic visual inspection of orifice plates is required to ensure the integrity of measurement with a digital flow transmitter. -
Key Insights to Control System Dynamics
Learn important strategies and concepts that can lead to a better industrial career and significantly improved system performance at your plant or facility. -
PID Controller Design for Indirect Vector-Controlled Induction Motor [Technical]
Decoupling of the stator currents is important for smoother torque response of indirect vector controlled induction motors.