Articles and News

This database, called FLUIDAT, is used by the company for configuration and calibration of its portfolio of flow meters and controllers, and for calculating pressure differences, valve seats, etc..

A process stage in the process model can be mapped to a unit procedure in the procedural model, which in turn is mapped to a unit in the physical model.

Founded in the early 1940’s, MCAA has been serving industry organizations for seventy-five years. MCAA is the trade association for manufacturers and distributors of instrumentation and systems associated with the Measurement, Control & Automation Industry.

The top process industries grew at a faster rate than the top discrete industries in 2017, and this trend continued in 2018, according to the “Low Voltage Motors Report” from IHS Markit.

The 2019 product catalog features performance data, sizes, specifications, and technical references for the company’s portfolio of current sensing switches, transducers, transformers, and ground fault protection products.

Previously, Bishop was the Vice President of Finance, Planning, Analysis, Reporting, and Process Improvement for Macy’s Logistics. He also has experience as the Senior Vice President of Logistics at Levitz Furniture, Vice President of Supply Chain at Giggle, and Director of the East Region Distribution at Toys R Us.

By Bill Lydon, Editor, Automation.com Based on discussions at the Rockwell Automation Fair, this article explores Rockwell Automation and PTC's committment to building out software into an integrated Industrial Digitization solution, in order to fully achieve the goals of Industry 4.0 and Smart Manufacturing.

By combining each party’s strengths, the resulting joint solution will provide real-time measurement of ore grades and byproducts by MineSense’s BeltSense in combination with a single material and quality management system, Siemens Simine MAQ

ISA's success depends on its ability to seize key opportunities while continuing to deliver value, both to individual members and to the global automation community.

Cable shield, connected to an isolated zero potential, is required to prevent nearby inductive loads and EMF fields from altering the low-level voltage or current levels in the signal wiring.

The addition of A.E. Valves supports Emerson’s Main Valve Partner initiative to be a supplier of final control solutions for the LNG industry, and complements its Vanessa triple-offset valve range to create a solution for process isolation in critical cryogenic and severe service applications.

The acquisition is intended to accelerate delivery of Emerson’s digital transformation roadmap by adding skillsets in information technology/operational technology (IT-OT) and application knowledge to help integrate data from the plant floor to business systems.

The competition will involve using SimCentral, AVEVA’s industrial simulation platform, to solve a problem created by the company in collaboration with Dr. Richard Turton, renowned author and industry expert in the field of chemical process simulation.

This 241 page report has a comprehensive Executive Summary and Conclusions for those with limited time. 10 primary conclusions are presented then infograms with data.

An improved PID controller based on predictive functional control is developed and tested on the chamber pressure in an industrial coke furnace.

Key supplies to the substations include ABB Ability-based automation and control systems, intelligent protection equipment, transformers with sensors, digitally enabled switchgear and advanced communication systems.

Common noise must be in phase between conductors, or it converts to normal mode or differential noise.

Beta testers of the ammonia and carbon monoxide detectors receive up to fifty percent discount on the first three ammonia or carbon monoxide Vanguard detectors they purchase.

Tricco was tasked with developing a secure and reliable way to collect data from control systems running at power plants located hundreds of kilometers from the Siemens office. The first phase was to be a pilot—to connect his WinCC OA SCADA system to a Siemens T3000 DCS running at a power plant located about 100 kilometers from Buenos Aires.

Tricco was tasked with developing a secure and reliable way to collect data from control systems running at power plants located hundreds of kilometers from the Siemens office. The first phase was to be a pilot—to connect his WinCC OA SCADA system to a Siemens T3000 DCS running at a power plant located about 100 kilometers from Buenos Aires.