Articles and News

The survey found that over half (54%) of ICS companies interviewed have experienced at least one cyberattack in the last 12 months – with one-in-five (21%) experiencing two incidents in the same time frame.

The modular CK design enabled the operator to tailor the actuator specification to precisely match the requirements of the application. The selection of CK actuators complete with Centronik digital control units required only the provision of a mains electricity supply to provide automation of the previously hand operated valves.

FG05M, an overview course that provides technicians, engineers and managers the basic understanding of industrial process measurement and control and a foundation for communicating with other control systems professionals, is now offered in a training format that delivers the same valuable information in small, computer-based chunks.

By Scott A. Kortier, Schneider Electric Software Automation applications are benefiting from HMIs that have moved well beyond panel device replacers and are now collecting, filtering and displaying data from multiple machines or processes.

The 2017 Hannover Fair taught us one thing above all others. Manufacturing winners and losers will be defined by their understanding and application of Industry 4.0 and IoT solutions.

By John Rinaldi, Real Time Automation In their latest series of announcements, it’s clear that OPC UA is key to Microsoft’s strategy of entering and dominating the factory floor through its Azure cloud services.

This tool provides a self-guided assessment for machine builders to measure their performance in the three pillars of industrial safety: culture (behavior), compliance (procedure) and capital (investment in contemporary technology).

Manufacturing technology executives will focus on ‘Empowering Manufacturing’s Future’ during the 2017 Global Automation & Manufacturing Summit on Tuesday, November 7 at the Integrated Automation, Motion & Drives trade show (IAMD USA) co-located with FABTECH 2017 in Chicago.

Founded in 1996 and headquartered in Cologne, Germany, FASys is a vendor of manufacturing software solutions, including DIN 4000/4003-based tool and resource management, and the integration of presetting and CNC machines (DNC).

By Kent Lennartsson, Research Manager, Kvaser AB The use of CAN began in the automotive industry and has since branched out into a multitude of sectors, including industrial automation. However, CAN in itself is not equipped to handle the control processes needed for this complex industry. Instead, a secondary, higher layer protocol was required to make adoption possible.

By Bill Dehner, AutomationDirect.com A recent study by the Identity Theft Resource Center concluded that in 2016 U.S companies and government agencies were breached 1,093 times. That’s a new record and a 40% increase from the 780 breaches in 2015.

NEC 2002 defines an enclosure Type 4x as ideal for outdoor use and resistant to splashing water, windblown dust, hose directed water, and corrosion.

ABB’s delivery includes mechanical equipment for the hoist plants and shafts, electrical and control equipment, construction, electrical installation, installation supervision, site management as well as commissioning.

The Rockwell Automation TechED event will feature over 750 hours of training, including hands-on labs, technical sessions and discussion forums. Attendees can learn about the techniques and technologies to maximize their manufacturing and production operations.

Powerful market forces are driving exciting changes in the use and design of laboratory automation and robotics.

By Cory Fogg, Automation.com Smaller manufacturers wishing to automate, may not have all the specialists they need on staff. With hiring processes taking days or weeks, the FactoryFix automated platform is working to connect these manufacturers with specialists in minutes

The Rate-Predictive Control (RPC) algorithm earned a United States patent in 2016 and is an inherently adaptive (or “naturally self-tuning”) process control algorithm.

Real-time analytics enable manufacturers to make smarter, better, faster decisions to achieve greater productivity from existing equipment.

Okuma’s donation of $100,000 in machine tools to the engineering technology programs at Central Piedmont Community College (CPCC), enables students to gain valuable hands-on machining experience and the skill set needed to enter the manufacturing workforce

This follows the acquisition of the Automated Technology Group (ATG), one of the UK’s largest independent suppliers of control and power solutions for industrial automation, in September 2015.