Search

BSMA-058 is a motorized ball-screw carriage guided by a linear bearing.

Easyfit radio frequency (RF) light switch and receiver set eliminates the need to string power cable from the switch to the light fixture, allowing electricians to locate on/off control switches anywhere in the room.

The new DCS4020 bipolar chopper drive has been designed for easy set up and use. It is ideal for development projects: just connect a single power supply and a motor and the drive is ready to run. Motor current is set using an on-board potentiometer.

RMW series has overvoltage, overcurrent and short-circuit protection, an auxiliary 12 Volt fan output, and remote error sensing. Price: from $104.14

This machine vision camera features a Kodak KAI-2093M imager and is available in two versions: Camera Link and LVDS (RS-644). Featuring 1920 x 1080 resolution with large 7.4m square pixels, the camera includes 8-bit output with lookup table. Similar to HDTV, the pixels are arranged in a 2K x 1K, 16:9 aspect ratio.

The M7500 infrared camera is configurable for midwave or longwave imaging and four different temperature bands, for a fraction of the cost of cryogenically cooled midwave IR cameras. Spectral tuning enables the M7500 to image in the midwave bands of 3.9 microns (furnaces and boilers through flames) and 4.8-5.2 microns (for glass), in a temperature range of 400°C-1600°C.

Vacuum lifter has a high air flow and pneumatic powered tilting for handling building materials, composites, and textured surfaces.

The latest release of Electrist Palm OS engineering calculator software adds many new features, including three new formula groups which help with 3 phase calculations. A 10 use trial can be found on the company's website. The full version costs $20.

BIM 360 includes a set of cloud services that will provide anytime, anywhere access to BIM project information throughout the project lifecycle.

CEM831 measures only 125 x 95 mm, and has an Intel Atom processor N270 with Intel 945GME and Intel ICH7M chipsets.

Models 750-553 and 750-555 4-channel I/O modules transmit analog signals with standard values of 0-20mA and 4-20mA, respectively.

Free software tools offer a way to connect Ethernet-based Opto 22 PACs (such as the SNAP PAC programmable automation controllers) to Modbus/TCP, Modbus/Serial, or Allen-Bradley DF1 devices and communicate with them natively, without the use of third party software drivers or other development.

The SBC81200 supports Intel Pentium 4 and Intel Celeron D processors up to 3.8GHz, with a 533/800MHz front side bus (FSB) and an Intel 865G + ICH5 chipset. It is compatible with ISA DMA and non DMA mode cards, and complies with a wide range of industrial and network application environments.

The Cooper Bussmann Limitron® DCM fuse is UL Listed up to 600Vac/dc and with interrupting ratings of 100,000A for ac applications and 50,000A for dc.

High Temperature Vacuum Suction Cups have a Viton fluorocaoutchouc FPM-F rubber pad with a heat-resistant felt coating that will not mar material surfaces. Capable of excursions to 752°F, these heat-resistant vacuum suction cups are designed for momentary pick-and-place applications with hot glass, cookware and metal objects.

The cabinets ensure that equipment such as emergency shutdown valves remain operational by keeping them below 60C in a fire for periods of up to 90 minutes.

A new line of Cooper Bussmann cable limiters are designed specifically to protect low-voltage grid network and service entrance cables from short-circuit currents. The new Cooper Bussmann cable limiters provide superior protection against short-circuit currents in residential and light commercial applications up to 250Vac as well as commercial and industrial applications up to 600Vac for both copper and aluminum cables.

The GOT-3100T fanless touch panel computer has a 10.4-inch SVGA TFT high brightness (600nits) LCD display and an ultra low power consumption Intel Celeron M 1GHz CPU. The HMI platform handles vibration up to 1.3G, has a NEMA4x/IP65 compliant front bezel, and is 72 mm thick.

LSMA-175 low profile precision linear actuator is a single axis system for applications that require low profile narrow positioning stages.

NH fuses comply with IEC60269 and are lead and cadmium-free to meet the most stringent environmental standards. Dual-indication NH industrial fuse links provide ultra-reliable visual indication, with the ability to actuate micro-switches for remote indication of operation.