This feature allows bi-directional HART data transmission between PC-based HART software applications and HES connected field devices over Ethernet.

Moore Industries has released a significant product update to the TCS Temperature Concentrator System.

Moore Industries has announced the 330R2 1/8 DIN Process and Temperature Panel Meter to replace the discontinued 330R Process Monitor.

Moore Industries has announced the release of the SLA Multiloop and Multifunction Safety Logic Solver and Alarm.

Featuring a very narrow installation footprint, miniMOORE Signal Isolators, Converters, Boosters and Splitters combine multiple analog signal channels in a rugged, easy-to-install signal conditioner.

The IPT2 can be rack mounted for high-density installations in 5, 10 or 15 position racks that simplify air supply, filtering and regulation due to its backplane header design.

The models, for use when creating panel designs, process loops and system designs in 3D CAD systems, come in an upgraded online catalog featuring a pop-up 3D viewer.

Part of the Moore Industries FS FUNCTIONAL SAFETY SERIES, the exida® certified SIL 2 and SIL 3 capable STA Safety Trip Alarm performs as a logic solver and acts on potentially hazardous process conditions; warns of unwanted process conditions; provides emergency shutdown; or provides on/off control in Safety Instrumented Systems (SIS) and traditional alarm trip applications.

The ECT-DIN 2-Wire Isolator can be installed in hazardous locations and does not require installation in climate-controlled environments.

Moore Industries can supply and assemble ready-to-install instrument sub-systems for customers’ control and monitoring needs with instrumentation, cabinets, wiring, tubing, relays, and power supplies.

The SFY is designed and approved for use in a variety of processes and factory automation SIS including turbine flow meters, magnetic pickups, dry contact closures, variable frequency drives, turbine tachometer generators, rotating equipment, motor and conveyor speed as well as pulse and frequency output transducers.

This surge suppressor exceeds Severity Level 4 of IEC 61000-4-4, providing 3kA (8/20μsec) of surge protection, and can be used with Moore Industries’ temperature and signal transmitters, signal isolators and signal converters

The WNM Wireless Network Module has been redesigned with a sleeker housing and incorporating both Serial and Ethernet communications in one model

Trips have Intrinsically-Safe (IS) Field Connections that reduce installation and maintenance costs.

STZ temperature transmitter is for use in Safety Instrumented Systems (SIS) where dangerous processes occur.

THZ3 and TDZ3 2-wire (loop powered) transmitters provide an isolated and linear 4-20mA output proportional to input.

The STA Safety Trip Alarm is a SIL 3 capable safety logic solver designed and built to IEC 61508 standards and approved by exida.

The battery-powered THZ WirelessHART assembly transmits temperature and HART diagnostic information to a WirelessHART gateway in situations where power is not readily available.

Improvements include updated certifications, 22 direct and reverse output ranges, and a removable electronics module.

This addition makes alarms, signal isolators and other products suitable for use in remote applications such as oil and natural gas wellheads where power supplies are limited.

Safety Isolators and Splitters provide reliable isolation and signal conversion for HART data in functionally safe process control settings.

SRM Safety Relay Module, a relay repeater module, has been certified by exida for single use in Safety Instrumented Systems up to SIL 2.

WNM provides wireless communications between field sites that are up to 30 miles apart, and can act as a repeater for a virtually unlimited transmission range.

The update allows the NCS to be used as either a single or dual MODBUS master, providing Ethernet and dual MODBUS RTU master/slave communications.

The 2-channel MIT and the 2- and 4-channel MIX miniMOORE products now meet UL 508 criteria—the UL safety standard for industrial control equipment.

Available models supply 350mA or 500mA of isolated, conditioned simplex (non-redundant) or duplex (redundant) power to up to four segments.

STA is certified to IEC 61508: Parts 1, 2 and 3 by TÜV Rheinland for single use in Safety Instrumented Systems up to SIL 2.

miniMOORE family of multi-channel analog signal conditioners provides up to four I/O channels in a 1 inch (25.4 mm) footprint.

The microNCS provides MODBUS RTU master capabilities, distributed data acquisition and control capabilities.

TCS Temperature Concentrator System transmits up to 32 signals on a single twisted wire pair with HART.

A request from a semiconductor manufacturer led to the HTZ, which offers HART Communications and high accuracy for both humidity/dewpoint and temperature measurements.

The rugged I/O system can be used in Class I, Division 2, Groups A, B, C & D Hazardous areas in both the U.S. and Canada. This allows the NCS to be used in locations where explosive gases and liquids may be present.

The TFZ saves wire and installation costs by allowing up to 126 devices to be networked onto one, low cost FOUNDATION fieldbus H1 segment.

The offer includes choice of a thermocouple or RTD, 24 in. of extension wire, and an installation kit with all the necessary mounting components, including a spring, spacers and a clip.

WLM employs Spread Spectrum Frequency Hopping technology and robust error detection and correction for increased wireless security.

In new and retrofit applications, WORM Flexible Sensors replace straight sensor probes with a universal sensor that saves time and money. It fits any thermowell.

The NCS has been running since February 2005 in an environmental chamber at temperatures up to 221°F to prove it will work in Middle Eastern applications.

The EPX2 E/P transmitter is designed for use with normal instrument air, but it can also be used with natural gas, making it possible to use the transmitter in remote locations where no electrical power is available to drive air compressors. Its low power requirement of 3mA@12Vdc allows it to be powered by a battery or solar panel at remote sites.

The BIMETAL Dual-Mode Remote Thermometer provides on-site indication of process temperature conditions, and simultaneously provides a mV or ohm signal proportional to temperature for input to a transmitter, Remote Terminal Unit (RTU), controller, recorder, indicator, PLC, DCS or SCADA system.

The loop-powered Smart HART Temperature and Signal transmitters have input-to-output analog accuracy up to ±0.025°F, the absolute best in the industry. The 4-20mA temperature output signal also has a superimposed HART digital signal, which allows any HART-compatible control device to program zero, span, sensor trim offset and other calibration variables, and to interrogate and read multiple real-time process variables.

The ROUTE-MASTER Fieldbus System has been approved by Factory Mutual for use in the U.S. and Canada, clearing the way to apply it in hazardous areas. ROUTE-MASTER eliminates the crippling restrictions and extremely high cost of FISCO-based systems by allowing users to drive up to 350mA per segment and install up to 16 FOUNDATION Fieldbus instruments on a single fieldbus segment.

The LRX Low-Power Temperature Transmitter is suitable for oil and gas well-heads and similar installations where line power is not available. With an exceptionally low power consumption of only 3mA, the LRX mounts in remote or infrequently accessed field locations where solar or battery power systems are used.

The SPA2 alarm trips accept input signals from transmitters, temperature sensors, resistance and potentiometer devices, and direct millivolt sources. They provide on/off control, warn of trouble, and provide for emergency shutdown by sending up to four relay outputs when a monitored process signal falls outside a user-selectable high/or low limit. The SPA2 is FM-approved for use in hazardous locations.

FPS200 TRUNKGUARD Fieldbus Power Conditioner provides conditioned power for FOUNDATION Fieldbus H1 networks in general purpose and non-incendive applications. It is available in both simplex (non-redundant) and duplex (redundant) models. The “duplex” configuration provides redundant, load-sharing, hot-swappable power conditioners.

The TG300 TRUNKGUARD Device Couplers make connecting FOUNDATION Fieldbus H1 or PROFIBUS PA fieldbus devices in Zone 1 and 2 hazardous locations easy and inexpensive compared to traditional methods. TG300 TRUNKGUARD Device Couplers are ATEX-certified for use in Flameproof Zone 1 and 2 Locations, allow “live” access for maintenance without de-powering the segment, and eliminate the need for expensive Exd/Flameproof junction boxes.

Instruments are available for monitoring and controlling temperature, pressure and flow conditions at oil and natural gas well sites. Typical applications include Coal Bed Methane (CBM) and natural gas well heads; oil and gas processing, storage and transport; and tank and pipeline cathodic protection.

The TS Series TRUNKSAFE system provides a reliable method for maintaining continuous communication between a control system and instruments on a FOUNDATION fieldbus H1 segment. In the event of a failure on a fieldbus segment, TRUNKSAFE helps the control system switch immediately and automatically to a redundant path. This helps prevent the loss of a complete segment, the shutdown of associated equipment, and potential catastrophic process failures.

The TG200 TRUNKGUARD Series Fieldbus Device Couplers use a unique “fold-back” technique to disconnect a shorted instrument from the fieldbus segment, thus preventing complete segment failure.

Moore Industries' TPZ PROFIBUS PA Temperature Transmitter saves wire and installation costs by allowing up to 32 field devices (126 with repeaters) to be networked onto one, low-cost PROFIBUS PA data link. The TPZ features industry-leading 20-bit input resolution to deliver measurement accuracies of up to ±0.05°C (±0.09°F).

Moore Industries' T2X-DWB Wall-Mount Room Air Temperature Monitoring System is designed for monitoring indoor conditions in production facilities—such as in semiconductor, micro-electronics, pharmaceuticals and biotech processes—where maintaining stable ambient temperature is required for on-spec product and predictable yields.