Murr distribution junction blocks provide a convenient method for connecting sensors and actuators to the control cabinet.

More transducers and switches have been added to the AutomationDirect sensors lineup.

New WAGO multi-channel circuit breakers are available in two, four and eight channels.

The ProSense® LPM1 series of loop panel meters offers a simple, low cost digital display of an analog 4-20mA signal.

Forty-four new STEGO part numbers have been added to AutomationDirect’s enclosure thermal management and enclosure lighting product lines.

igus CF9 and CF10 series multi-conductor control cables for continuous flexing applications are available in sizes from 20AWG to 14AWG, with three to seven unshielded (CF9 series) or four and five shielded (CF10 series) conductors.

Two types of these brass solenoid valves are available: direct acting and pilot control solenoid valves. Both types of valves are 2-port, 2-position, normally closed.

AutomationDirect now offers native CAD files downloadable directly from their Web store to assist system designers in developing or updating their designs.

The DURApulse GS20 Series of next generation high-performance vfd drives provides many standard and advanced functions in a compact reduced size unit.

More fully digital soft starters have been added to the AutomationDirect drives and motor controls lineup.

AutomationDirect's GS AC drives were designed with simplicity and robustness in mind. We worked hard to make these drives the easiest to use in the industry. The GS series was specifically designed to be able to handle the higher range of American voltages.

Cut your PLC wiring time down to minutes instead of hours! The ZIPLink system eliminates the normally tedious process of wiring PLC I/O to terminal blocks. Simply plug one end of a ZIPLink cable into a DirectLOGIC I/O module and the other end into a ZIPLink connector module. It’s that easy! ZIPLinks use half the space, at a fraction of the total cost of terminal blocks.

Designing a pushbutton that will satisfy NEMA requirements while maintaining the value you've come to expect from AutomationDirect is not an easy task. We took advantage of the experience of Cutler-Hammer engineering to take existing product technology and make it better. We proudly carry the HT800 line of 30 mm pilot devices from Cutler-Hammer.

The DirectLOGIC 06 (DL06) programmable logic controller (PLC) is our first micro PLC to combine its fixed I/O of 20 inputs and 16 outputs with four option card slots for expansion (discrete, analog, communication modules), all in the same package. With the DL06 micro PLC, you can use the same PLC panel layout for all applications from 36 to 100 I/O.

The WinPLC is a revolutionary product that brings the best of the PC controls and the PLC world to a common platform.

The DL105 series is a fixed-I/O micro PLC with 10 inputs and eight outputs. Eight configurations are available in combinations of AC, DC, and relay I/O, as well as AC and DC power supplies.

The DL05 and the DL06 product lines are a family of micro PLCs designed to fit more applications than any other PLC family in their class. Starting with the DL05 at 8 inputs/ 6 outputs, all the way up to the fully expanded 100 I/O DL06 PLC, these PLCs are a standard that can grow with the changing needs of your machine or process control applications.

AutomationDirect offers a full line of operator consoles and consolets designed to house electrical and electronic controls, instruments, push-buttons, pilot light and operator interface systems.

If your application requires the flexibility of a modular control system, a DL205 PLC is the lowest cost, most versatile solution you'll find. In fact, all you need to do is pick out a CPU, plug it in the first slot of the base you choose, and then mix and match various modules into the available slots.

AutomationDirect's Terminator I/O line of field bus termination I/O products, a practical solution for remote I/O, PC-based control and distributed control applications.