The ROUTE-MASTER Fieldbus System has been approved by Factory Mutual for use in the U.S. and Canada, clearing the way to apply it in hazardous areas. ROUTE-MASTER eliminates the crippling restrictions and extremely high cost of FISCO-based systems by allowing users to drive up to 350mA per segment and install up to 16 FOUNDATION Fieldbus instruments on a single fieldbus segment.

The LRX Low-Power Temperature Transmitter is suitable for oil and gas well-heads and similar installations where line power is not available. With an exceptionally low power consumption of only 3mA, the LRX mounts in remote or infrequently accessed field locations where solar or battery power systems are used.

The SPA2 alarm trips accept input signals from transmitters, temperature sensors, resistance and potentiometer devices, and direct millivolt sources. They provide on/off control, warn of trouble, and provide for emergency shutdown by sending up to four relay outputs when a monitored process signal falls outside a user-selectable high/or low limit. The SPA2 is FM-approved for use in hazardous locations.

FPS200 TRUNKGUARD Fieldbus Power Conditioner provides conditioned power for FOUNDATION Fieldbus H1 networks in general purpose and non-incendive applications. It is available in both simplex (non-redundant) and duplex (redundant) models. The “duplex” configuration provides redundant, load-sharing, hot-swappable power conditioners.

The TG300 TRUNKGUARD Device Couplers make connecting FOUNDATION Fieldbus H1 or PROFIBUS PA fieldbus devices in Zone 1 and 2 hazardous locations easy and inexpensive compared to traditional methods. TG300 TRUNKGUARD Device Couplers are ATEX-certified for use in Flameproof Zone 1 and 2 Locations, allow “live” access for maintenance without de-powering the segment, and eliminate the need for expensive Exd/Flameproof junction boxes.

Instruments are available for monitoring and controlling temperature, pressure and flow conditions at oil and natural gas well sites. Typical applications include Coal Bed Methane (CBM) and natural gas well heads; oil and gas processing, storage and transport; and tank and pipeline cathodic protection.

The TS Series TRUNKSAFE system provides a reliable method for maintaining continuous communication between a control system and instruments on a FOUNDATION fieldbus H1 segment. In the event of a failure on a fieldbus segment, TRUNKSAFE helps the control system switch immediately and automatically to a redundant path. This helps prevent the loss of a complete segment, the shutdown of associated equipment, and potential catastrophic process failures.

The TG200 TRUNKGUARD Series Fieldbus Device Couplers use a unique “fold-back” technique to disconnect a shorted instrument from the fieldbus segment, thus preventing complete segment failure.

Moore Industries' TPZ PROFIBUS PA Temperature Transmitter saves wire and installation costs by allowing up to 32 field devices (126 with repeaters) to be networked onto one, low-cost PROFIBUS PA data link. The TPZ features industry-leading 20-bit input resolution to deliver measurement accuracies of up to ±0.05°C (±0.09°F).

Moore Industries' T2X-DWB Wall-Mount Room Air Temperature Monitoring System is designed for monitoring indoor conditions in production facilities—such as in semiconductor, micro-electronics, pharmaceuticals and biotech processes—where maintaining stable ambient temperature is required for on-spec product and predictable yields.