Ideal for service in chemical, electric power, food/beverage, landfill, oil/gas, manufacturing, pharmaceuticals, water/wastewater.

Design, process and plant engineers responsible for maintaining a sanitary environment in pharmaceutical, biotechnology and food/beverage plants will find that the FLT93C Flow Switch from Fluid Components International (FCI) provides accurate liquid flow rate measurement for clean in place (CIP) system operational integrity.

The versatile, green-friendly ST75 Air/Gas Flow Meter from Fluid Components International (FCI) accurately and reliably measures natural gas, carbon dioxide (CO2), and mixed waste gases in small line sizes to optimize brewing fermentation processes, product quality and overall plant efficiency.

Engineers responsible for landfill biogas recovery and green co-gen electrical energy systems will find the rugged ST80 Series Thermal Flow Meter from Fluid Components International (FCI) with its Wet Gas MASSter™ technology delivers higher installed accuracy with more reliable measurement in this moist, dirty, demanding environment.

The AS-LLE Point Level Sensor can be used with most any liquid, including water, oil, hydraulic fluid, coolants, and more.

FCI's wet gas (WG) sensor delivers gas flow measurement in the presence of moisture and condensation droplets. Available with the Model ST80, this WG sensor can be applied for use in entrained moisture and rain-shielding applications.

When it comes to maintaining insertion style meters such as FCI’s ST Series, the sensor assembly is retracted from the pipeline through a ball valve/packing gland. When retracted, the ball valve is closed.

FCl’s AST thermal mass flow technology for the ST80 Flow Meters features a hybrid sensor drive. This measuring technique combines both constant power (CP) and constant temperature (CT) thermal dispersion sensing technologies in the same instrument.

FCI’s thermal mass ST51A Biogas Flow Meter is designed specifically for dirty, potentially hazardous biogas processes.

FCI’s thermal flow meters with HART communications support the production of food and beverages, chemicals, electric power generation, mining and metals, pharmaceuticals, pulp and paper, oil/gas production and refining, pollution monitoring, solid waste, water/wastewater treatment and more.

The measurement of compressed air flow lines with the FS10i Switch/Monitor can provide information to the equipment’s control system in order to optimize the air flow.

It can be calibrated to measure gases over a flow range from 0.04 to 559 SCFM (0.07 to 950 NCMH), depending on line size, which is useful in low-flow applications requiring small doses.

The installation of ST50 Series Flow Meters in the process control loops of industrial air blower and dryer systems provides hot air flow rate monitoring. The use of mass flow meters ensures rate of flow measurement and totalized flow measurement for zone control and overall system operational efficiency.

FCI’s MT100 Series Flow Meters, with the optional CEMS and CERMS applications package, provide a 24-hour interval automated calibration drift test of low and high span points, and interference sensor check.

Designed for process and plant engineers challenged with measuring wet dirty mixed gases in solid waste operations with co-generation electric power systems, the enhanced ST51 Series Thermal Mass Flow Meter from Fluid Components International (FCI) is designed to provide continuously accurate measurement of landfill gas flow to the co-gen electric power engines.

Applications include wet/dry detection, sump level detection, high/low level alarm and control, interface control in separation vessels, foam and sediment interface control, and agitation detection.

Process engineers responsible for on-site plant biomass combined heat and power (CHP) systems may find the ST51 Series Thermal Mass Flow Meter from Fluid Components International (FCI) provides accurate measurement of syngas fuel flow to the CHP engine.

The FS10i Flow Switch/Monitor operates over a flow range in air/gas from .25 FPS to 400 SFPS [0,076 MPS to 122 MPS] and in water from 0.01 FPS to 0.5 FPS [0,003 MPS to 0,15 MPS]. Repeatability: ±0.5% of reading.

FCI’s inline FLT93L Flow Switch is a thermal dispersion flow/level/temperature switch that was designed based on FCI’s more than 50 years of flow/level/temperature switch applications experience

Designed specifically for flow measurement in round pipes or stacks of 12 inches [300 mm] and larger diameter, and square or rectangular ducts with cross sectional area of 100 inches [250mm] and larger, the model ST102A Flow Meter and the new MT100 Series Flow Meters from Fluid Components International (FCI) provide two to eight non-clogging, no moving parts sensing points.