The WM15 is a Class 1 (kWh) 3-phase power analyzer which can be used for single, two and three phase systems, as well as wild-leg systems. It can measure most relevant instantaneous electrical variables, energy consumption, and harmonic distortion.

The platform is designed for handling big data and Industrial Internet of Things (IIoT) applications driven by global developments such as urbanization and infrastructure investments.

L-com’s TRG695AHF-series cables are designed for industrial and outdoor environments where ordinary patch cables would fail.

The distributors allow for expansion of the 720 series connectors and is suitable for use in factory control systems and electrical equipment requiring IP67 protection.

In addition to operation and integration, the PowerFlex 6000T has other including a 10” color touchscreen enhanced HIM, Forensic Data Recorder functionality for troubleshooting, input power monitoring capabilities for kW, kVA, kVAR, elapsed kWh, MWh, power factor, and secure flash-over-fiber firmware updates for all main control boards and power cells.

The applications are numerous, and they all build on the idea of temporarily storing the excess or necessary electrical energy largely independently of the grid.

Features include an IP67 sealed one-piece design, embedded LEDs that indicate which ports are active and which signals are being used, and wiring diagrams on every box detailing each port and pin layout.

The LN Series of panel mounted solid state relays offer back-to-back SCR switching up to 75 Amps at 528 VAC.

Based on a convection-cooled design, the Lyte series operates between -20°C to +70°C, with full power available from -10°C to +50°C at 230Vac. It allows cold start at -30°C even in extreme condition. The overcurrent protection is designed to operate in constant current mode, which makes the product suitable for inductive and capacitive load applications.

The M8 connector is designed for use in applications including: factory automation, control systems, and electrical equipment requiring IP67 protection.

At 59 mm wide, the 480 W UNO is intended to save space in the control cabinet. The 480 W UNO is UL Listed for use in Class I, Division 2 applications.

The L6983C enters pulse-skipping mode when the load current is below 0.6A while the L6983N, suitable for noise-sensitive applications, stays in PWM (pulse-width modulation) mode at all loads to minimize electromagnetic disturbances.

The PowerLogic ION9000T meter builds on the latest generation of power quality meters and the he ION9000 and ION7650. It shares the core of the original meters, but also adds high-speed transient capture capabilities

EXAIR’s Gen4 Two Outlet Selectable Voltage Power Supply allows users to choose input voltages of 115VAC or 230VAC. Two 5kV stainless steel output connectors can energize two static eliminators.

The 9900D uses 400kVA power modules integrated with intelligent bypass modules. The bypass modules are available in 1200kVA, 1600kVA, 2000kVA sizes with up to five power modules. The scalable design adds supplemental modules over time to meet increasing capacity needs.

The MPU-240S family is packaged in a 6” x 4.18” x 1.38” U-Chassis. Three I/O connector types are available for all models, terminal blocks, Molex, or clamp blocks.

These products bring performance to industrial applications, features include: 24 / 48V outputs (-2% ~ +17% VADJ Range); high efficiency of 95%; 150% peak power for 4 seconds; packaged in a metal enclosure that is EN61373 qualified for railway shock and vibration.

Designed for critical applications that may have space limitations, these 12 V DC power supplies have an adjustable signal output, which enables LED and remote digital monitoring to detect critical operating states before faults occur.

TRACO POWER has announced the release of their TIB 240-EX Family of 240 Watt DIN rail power supplies that are designed for harsh environments & hazardous locations with certifications for ATEX II3G and UL HazLoc Class I / Div 2 standards.

The following are four working modes of UPS power supply introduced by ATO: normal operation, battery operation, bypass operation and bypass maintenance.