microMAX R integrates motion control, servo amplifier, networking and user I/O in a compact package.

ServoSoft added 4900 Michael Koch GmbH resistors to its servo sizing software database.

J4/J5 joysticks for heavy-duty use are available in analog, digital, PWM and CANbus output versions. All resist EMC interference.

Low-dust, raised-greased versions of Grade C10 metric rolled ball screws are induction hardened for rigidity and performance.

L15 incremental encoder provides up to 40,640 cycles per turn, or 162,560 counts by using the quadrature detection option in a PLC.

MForce MicroDrive microstepping driver delivers output current up to 2.8A peak for controlling motors from size 8 to size 34.

ELCOM ST Series N2300 slotted brushless DC motors incorporate internal Hall sensor feedback for linear speed-torque characteristics, high starting torque, and variable speed control.

Roller screws offer a compact solution with reliable performance in factory automation applications such as assembly, handling and injection molding.

ISCM4805 / ISCM8005 Intelligent Servo Control Modules combine motion controller, drive and PLC functionality in a single compact unit. They provide distributed and coordinated control of brushless, DC, linear or step motors up to 240W and 80V.

Suitable for use by OEMs, the ST10-S delivers up to 10.0 A with 24-80VDC input. It can be controlled by a step and direction input, or by a host controller via serial communications.

IndraMotion for Trans scalable single axis control solution can replace legacy motion controls found in thousands of metal cutting tools. It consists of a power amplifier and a scalable controller section, which can operate induction, permanent magnet, rotary or linear motors using standard position feedback systems.

The ATS115 hard cover, side-sealed stage has a flange-mounting interface for attachment of a wide variety of motors. The side seals keep dirt and particulates out of the stage, protecting the bearing surfaces from contamination and significantly increasing stage bearing life.

Actuators include an electromechanical fail safe actuator for use in gas turbines and an electrical multi-axis actuator unit incorporating software control for automotive testing.

Speedi-Roll linear guiding system offers high load-carrying capacity, rigidity, and torque resistance where long strokes and/or high speeds are required. It includes a machinable aluminum guide rail fitted on both sides with hardened steel raceways and a carriage with either four or six V-shaped steel rollers housed in an aluminum base.

TPM+ servo actuator includes a high precision gearhead, high-pole motor and feedback all integrated into a single package. Because the actuator concept eliminates extra components, the size and mass have been reduced by 50% as compared to a standard motor and gearbox combination.

VLT variable frequency Micro Drives are available in single-phase 200 – 240 VAC: 0.25 – 2 HP; three-phase 200 – 240 VAC: ⅓ – 2 HP; and three-phase 380 – 480 VAC: 0.5 – 3 HP power range configurations.

RSH Series soft start/stop motor controllers are available in two sizes with basic rotary or advanced push button controls. Motor control capacity ranges from 1.5HP at 220VAC to 40Hp at 600VAC.

DRS26 CoreTech Incremental Encoders are now programmable, allowing users to freely program the width of the zero pulse and the number of lines from 1 to 8,192. This allows users to replace multiple encoders with a single type of encoder that can be programmed at any time, in any location, for any application.

The C3H has four output currents: 50, 90, 125 and 155 Amps RMS. All an input voltage range of 350VAC to 528VAC. These drives are capable of controlling both synchronous and asynchronous motors.