Typical uses for this drive system include packaging machines, handling applications such as pick-and-place, wood and plastics processing, as well as life sciences and digital printing.

CUI offers the AMT series encoders with configurable pulses per revolution (PPR). The PPR can be set for most models using the free AMT Viewpoint software (the AMT10-series encoders are configured using DIP switches).

The dual axis linear stepper motor is a complete air bearing positioning system with the motor, the bearings, and the positioning system all built into one compact package. Integrating linear encoders with the stepper motor allows for a hybrid, closed loop positioning system.

These motors now meet the IE5 ultra-premium energy efficiency class defined by the International Electrotechnical Commission (IEC).

Applications include assembly, metal fabrication (pressing, punching, clamping), automotive manufacturing, timber processing, motion simulators and more.

Available off-the-shelf in travel lengths of: 600 mm (23.622 in.), 700 mm (27.559 in.), 800 mm (31.496 in.), 900 mm (35.433 in.), and 1000 mm ( 39.370 in.), these stages are available with either a Two-Phase Stepper Motor or with a Three-Phase Brushless Motor with a Quadrature Incremental Optical Encoder.

This linear actuator can develop 11.0 oz (3.1 N) of continuous force and 34.8 oz (9.7 N) peak force. Direct coupling of the actuator to the load results in zero backlash and allows for acceleration/deceleration, and high speed positioning.

The FR-E800 Series is designed for engineering, technology, and product man- agers in industries such as packaging, material handling, food and beverage, and water and pumping, as well as those who are adopting PM motors to improve their energy efficiency.

The new Variable Frequency Drive features permanent magnet (PM) motor control and reduces energy usage so users can meet overall energy efficiency standards.

Rotork’s YT-3700 and YT-3750 pneumatic smart positioners employ continuous monitoring and graphic display of valve position, set point target over time and internal circuit board temperature over time.

The PR100-45-01 and -02 stages can be ordered plug-and-play with a fully a compatible multi-axis motion controller from OES.

The app offers users one source for all bearings-related information needs. The Regal PT mobile app features a registration module to allow users to register bearings and receive a 12-month extension of the company’s standard limited warranty.

NXR 7100 motors extend the power range of the existing NXR 5000 and NXR 5800 up to 1750 Hp while offering the same features.

The MELSERVO-J5 Series is intended for a range of industries, including manufacturing, packaging, printing, converting, material handling and more.

The LR2 line reactor series adds seven frame sizes to match all GS, DURApulse and WEG drives. VTF series output filters combine line reactor and resistor-capacitor filter circuit to provide protection against voltage wave reflection, especially on long motor cable runs up to 1,000 feet.

This design allows for a motors with minimal cross section diameter of up to 1.20 inches [30.5 mm], and strokes up to 0.60" [15.2 mm] stroke; this size generates up to 1.12 lbs [5.0 N] of continuous force and 3.36 lbs [15 N] of peak force.

The LVCM-025-038-01 features a continuous force of 2.5 lbs (11.0 N) and a peak force of 7.8 lbs (34.7 N) and the LVCM-025-038-02 features a 1.000 in (25.4 mm) stroke, whereas, the LVCM-025-038-01 features a stroke of 0.37 in. (9.5 mm ) and the LVCM-025-038-02 features a continuous force of 16.4 oz (4.6 N) and a peak force of 51.9 oz (14.4 N).

This controller is a two-channel motor output stage for BLDC motors used in MDRs, regardless of the conveyor or roller motor vendor.

With the update, it is now also possible for propulsion drives in Automated Guided Vehicles (AGVs) and the NGV gearbox range that is tailored to these vehicles.

The TWR-034-800-1RC has a total angular displacement of 34 degrees [0.59 radians] and a motor constant of 275 in-oz/sqrt(watt) [1.92 N-m/sqrt(watt)]. The voice coil motor requires 1.7 amps of continuous current per coil and 5.1 amps of peak current per coil to generate the specified forces.