The Vortab Company’s product line of process flow conditioners, with their flow profile and anti-swirl tab design, correct flow disturbances to mimic adequate pipe straight run and produce a highly repeatable, symmetrical flow profile.

The user interface is adaptive and multi-lingual (English, French, German, Chinese, Japanese and South Korean). Bronkhorst FlowSuite is available from the Microsoft store.

This linear actuator can develop 11.0 oz (3.1 N) of continuous force and 34.8 oz (9.7 N) peak force. Direct coupling of the actuator to the load results in zero backlash and allows for acceleration/deceleration, and high speed positioning.

The FR-E800 Series is designed for engineering, technology, and product man- agers in industries such as packaging, material handling, food and beverage, and water and pumping, as well as those who are adopting PM motors to improve their energy efficiency.

The new Variable Frequency Drive features permanent magnet (PM) motor control and reduces energy usage so users can meet overall energy efficiency standards.

Rotork’s YT-3700 and YT-3750 pneumatic smart positioners employ continuous monitoring and graphic display of valve position, set point target over time and internal circuit board temperature over time.

The ABC works with any meter that has a pulse output and either a valve or pump. The operator uses the arrow keys to set the batch volume, then presses the start button.

The PR100-45-01 and -02 stages can be ordered plug-and-play with a fully a compatible multi-axis motion controller from OES.

The app offers users one source for all bearings-related information needs. The Regal PT mobile app features a registration module to allow users to register bearings and receive a 12-month extension of the company’s standard limited warranty.

NXR 7100 motors extend the power range of the existing NXR 5000 and NXR 5800 up to 1750 Hp while offering the same features.

The MELSERVO-J5 Series is intended for a range of industries, including manufacturing, packaging, printing, converting, material handling and more.

The LR2 line reactor series adds seven frame sizes to match all GS, DURApulse and WEG drives. VTF series output filters combine line reactor and resistor-capacitor filter circuit to provide protection against voltage wave reflection, especially on long motor cable runs up to 1,000 feet.

This design allows for a motors with minimal cross section diameter of up to 1.20 inches [30.5 mm], and strokes up to 0.60" [15.2 mm] stroke; this size generates up to 1.12 lbs [5.0 N] of continuous force and 3.36 lbs [15 N] of peak force.

Automation Direct announced ProSense motor control relays to perform specific protective functions for motors or motor components.

The software supports the Micro Motion Coriolis transmitters with data historian output capabilities such as the 5700 and 4200 models and provides a snapshot of a moment in time in the flow process.

The LVCM-025-038-01 features a continuous force of 2.5 lbs (11.0 N) and a peak force of 7.8 lbs (34.7 N) and the LVCM-025-038-02 features a 1.000 in (25.4 mm) stroke, whereas, the LVCM-025-038-01 features a stroke of 0.37 in. (9.5 mm ) and the LVCM-025-038-02 features a continuous force of 16.4 oz (4.6 N) and a peak force of 51.9 oz (14.4 N).

This controller is a two-channel motor output stage for BLDC motors used in MDRs, regardless of the conveyor or roller motor vendor.

With the update, it is now also possible for propulsion drives in Automated Guided Vehicles (AGVs) and the NGV gearbox range that is tailored to these vehicles.

The TWR-034-800-1RC has a total angular displacement of 34 degrees [0.59 radians] and a motor constant of 275 in-oz/sqrt(watt) [1.92 N-m/sqrt(watt)]. The voice coil motor requires 1.7 amps of continuous current per coil and 5.1 amps of peak current per coil to generate the specified forces.

The No Drip Internal Mix Atomizing Spray Nozzles work in the same way our standard atomizing nozzles do, but have the added benefit of positively stopping liquid flow when compressed air is shut off.