Automation Direct announced ProSense motor control relays to perform specific protective functions for motors or motor components.

Based on a convection-cooled design, the Lyte series operates between -20°C to +70°C, with full power available from -10°C to +50°C at 230Vac. It allows cold start at -30°C even in extreme condition. The overcurrent protection is designed to operate in constant current mode, which makes the product suitable for inductive and capacitive load applications.

The M8 connector is designed for use in applications including: factory automation, control systems, and electrical equipment requiring IP67 protection.

Offered in both polarization maintaining and single mode fiber variants, these lasers can be optimized for wavelength tuning by temperature or current depending on the application.

Moore Industries can supply and assemble ready-to-install instrument sub-systems for customers’ control and monitoring needs with instrumentation, cabinets, wiring, tubing, relays, and power supplies.

ROHM offers the simulator, ROHM Solution Simulator, that allows users to perform systematic verification of power devices and ICs

These pole mounted, solar power systems provide autonomous electrical power for telecommunications equipment, gate openers, security cameras and electronics, traffic devices, wireless radios, PLC/control panels, sensors, motors, and lights.

To meet different needs in automation industry, the eBOX710-521-FL has a flexible I/O window slot for customization and two swappable 2.5” SATA HDD drive bays with Intel RAID 0&1.

Based on the PICMG specifications for standardized COM Express heatspreaders they offer a cooling mass and surface area for 3.5-inch SBC designs

Honeywell Forge Energy Optimization is an autonomous building solution focused on decreasing energy consumption.

Multi-conductor flexible control cable from AutomationDirect is now available in 20 AWG unshielded models with 3 to 25 conductors including ground.

The Local Hand Station is suitable for applications such as large penstocks, where it is difficult to access the actuator due to height, in chamber applications where the actuator is located below the ground and space is limited or for control when the actuator/device may be in a hazardous location.

At 59 mm wide, the 480 W UNO is intended to save space in the control cabinet. The 480 W UNO is UL Listed for use in Class I, Division 2 applications.

ITSENCLOSURES IO series enclosures are designed for use with flat panel monitors and thin client/small form computers. The operator interface enclosures are a solution for limited space environments.

Designed specifically for industrial and/or highly-corrosive environments, TAC and THP products operate on 208/230 VAC, single phase 50 and 60 Hz power sources, depending on size.

The Power over Ethernet (PoE) bridge is intended for use in manufacturing plants, restaurants and other spaces where water, cleaning solutions and other chemicals come into contact with monitoring equipment.

AutomationDirect's 5-pole, M8 (Pico) quick-disconnect cables are available with axial or right-angle female connectors and pigtail wiring in 1.5, 5 and 10M cable lengths.

W-TYPE series industrial enclosures for aggressive environments are specially designed for industrial applications operating in where corrosive external agents are present such as saltwater sprays.

The M16-X has a rated voltage of 50 V AC/60 V DC and is available with an optional female panel mount connector.

The AX / KX solution is designed for maximum space availability. The AX, now with larger gland plates, creates more space for cables. In addition, integrated locators enable incorporation of the interior installation rails. These rails also support dynamic loads seen in many industrial environments