Industry Products

PrismTech and Green Hills offer a complete Software Communications Architecture (SCA)-compliant Software Defined Radio (SDR) Operating Environment (OE) running on the INTEGRITY real-time operating system.

Enhancements to xCoupler plant to business system data modules include message acknowledgement, handshaking and store-and-forward features. These modules work with Rockwell Automation ControlLogix PACs.

Modules include a model that provides two independent, isolated serial ports and one that provides four independent, isolated serial ports. Up to six modules can be located in the RX3i backplane. Each port can be configured for MODBUS Master, MODBUS Slave, or Serial I/O protocol.

InVision Downtime Reduction System monitors fuses and circuit breakers. When a circuit opens, the maintenance staff is automatically notified by phone, e-mail or fax of the circuit's exact location, the correct replacement fuse to bring, and the appropriate level of personal protective equipment (PPE).

The loop-powered Smart HART Temperature and Signal transmitters have input-to-output analog accuracy up to ±0.025°F, the absolute best in the industry. The 4-20mA temperature output signal also has a superimposed HART digital signal, which allows any HART-compatible control device to program zero, span, sensor trim offset and other calibration variables, and to interrogate and read multiple real-time process variables.

The NA-820 extreme performance network security platform has a 1U rack-mountable form factor and seven PICe Gigabit Ethernet ports for the small and medium business market. The platform integrates a high performance embedded SBC, the SBC8A820, which supports an Intel Core2 Duo processor.

KAN154B supports the BACnet MSTP (master slave/token passing) network, a high-bandwidth wireless mesh solution for control of HVAC, lighting, access control, power management, sensor data acquisition, and other building automation applications.

Industrial Ethernet switches are compatible with IntraVUE network management software. IntraVUE was developed to fill a gap between existing IT networking tools and what is needed to support Ethernet applications on the plant floor.

The 375 Field Communicator enables configuration, calibration and troubleshooting of more than 1000 HART and FOUNDATION fieldbus devices from 124 manufacturers.

PSI-MOS Profibus Fiber-Optic converters with conformal-coated printed circuit boards were designed primarily for use in the shipbuilding and marine industries, where saltwater environments can lead to corrosion of the PCBs.

The NDC8 control platform now supports up to 10 AC drives per AGV. The drives can be used for steering, driving or auxiliary control, and AC technology helps increase power while reducing running costs. It has an OPC client, allowing for a smooth connection to any I/O resource on the market.

The field-mounted 9311-FB delivers intrinsically safe spur connections from a non-intrinsically safe trunk for connection to FOUNDATION fieldbus H1 or Profibus-PA field devices. When installed in a suitable enclosure, the 9311-FB can be installed in Zone 1 (gas) or Zone 2 (dust) hazardous areas.

Active Ethernet I/O extends LabVIEW's remote monitoring capability. LabVIEW's built-in Modbus library can easily be used to connect to an Active Ethernet I/O server. LabVIEW also has a passive TCP software component that can instantly receive TCP/UDP messages from Active Ethernet I/O servers.

DataCELL FIELD Profibus PA ISA/SP50 Type A cable is available in 18AWG with foil shielding. It is rated for CSA CMX-Outdoor-CMG, FT4 and ITC (instrument tray cable)/PLTC (power limited tray cable) exposed-run (ER) applications. An arctic-rated marine shipboard version suitable for use down to –55°C is also available.

The 9331-TI handles 2 and 3 wire RTD, thermocouple, voltage and resistance inputs, with each unit supporting eight independently configurable temperature inputs. In applications like distillation columns, tanks, reactors, boilers, etc., it can reduce installed costs by as much as 70% per point when compared to traditional single temperature inputs.

The server enables users to easily create large-scale centralized building control and monitoring systems that are controlled from a “single seat” workstation.

JetPort 5604 series 4-port Serial to Redundant Ethernet Device Server supports RS232/422/485 serial interfaces. JetPort 5604i provides 4 serial interfaces with 2KV optical isolation protection. One IP address provides dual redundant paths to control four serial devices over Ethernet.

The ROUTE-MASTER Fieldbus System has been approved by Factory Mutual for use in the U.S. and Canada, clearing the way to apply it in hazardous areas. ROUTE-MASTER eliminates the crippling restrictions and extremely high cost of FISCO-based systems by allowing users to drive up to 350mA per segment and install up to 16 FOUNDATION Fieldbus instruments on a single fieldbus segment.

DR-200 provides secure communication between remote sites using a simple ADSL Internet service. It enables economical and reliable links connecting equipment such as PCs, PLCs, RTUs and I/O devices. It incorporates a firewall and five IPsec VPNs enabling encrypted secure tunnels. It can replace high-cost leased lines.

ClassicLine I/O module eliminates the need for mounting tools and provides a simple connection method to the AS-i networking system. It has a simple sliding mechanism that quickly connects the module’s upper and lower parts.