On the input side, the module can be used for isolating four-wire powered devices, or for powering and repeating the signal of two-wire field devices. The two outputs are isolated 1:1, 4-20 mA with the HART communications signal intact.

OptiPMD's design and size makes it suitable for mobile lab applications. It also includes safety standards including an optical flame detector, a built-in fire suppression system, and quality control functions, which allow users to enter specification limits by product.

The MVR-SC eliminates the need to integrate VRF leak detection into a BAS controller. By implementing a hybrid Ethernet serial network the MVR-SC simplifies the Modbus integration

The model NCC14-78-830-1SM can generate a continuous force of 92 pounds [410 N] and a peak force of 294 pounds [1300 N] at a duty cycle of 10% (i.e. 1 second on, and 9 seconds off). A moving mass of 4.4 lbs [1.97 kg] allows for a maximum theoretical continuous acceleration of more than 20 G’s.

The Smart Embedded Vision initiative provides a suite of FPGA offerings that includes IP, hardware and tools for machine vision designs across the industrial, medical, broadcast, automotive, aerospace and defense markets.

The SW-4000TL-10GE features the same 4K (4096 pixels) line resolution and the same 66 kHz line rate for 24-bit non-interpolated RGB output as the original SW-4000TL-PMCL model.

The employee filtering feature uses a combination of Bluetooth Low Energy (BLE) technology and employee-worn tags to automatically identify and remove staff from customer counts, a process that can otherwise be manual or missing in retail environments today.

With measurement ranges of ± 0.04 to ± 2 inches, the gage heads operate over anoperating temperature range of 65°F to 185°F while performing at a linearity ±0.15% of full range.

These laser sensors’ different detection and processing modes enable detection of complex-shaped objects. While their enhanced background suppression capability allows them to detect and measure dark and transparent objects, such as plastic film or products.

By updating the technology and optimizing the storage system, the software has been upgraded from 400 to up to 150,000 value changes per second. Runtime performance is now unaffected when archiving large amounts of data.

The AG-LC Series has a solid-core housing design that provides aspace for multiple conductors to pass through one sensing window.

With the addition of sensors for carbon monoxide and oxygen depletion detection, these monitors can now be used for other applications, or additional gas monitors can be deployed. When and if process conditions change, monitors can be moved as necessary, so long as they are placed within the coverage area of the WirelessHART network.

SurveilsQUAD (e-CAM20_CUXVR) is a multiple camera solution that consists of four 2MP camera board and a base board to interface with the NVIDIA Jetson AGX Xavier Developer Kit.

The TS3 sensor is an embedded sensor system that sends out ultrasound waves in a frequency range inaudible by humans.

The Alvium camera series is a camera platform that combines the advantages of embedded sensor modules with the performance of industrial cameras for image processing.

Beckhoff will showcase a lineup of updated automation hardware, software and gigabit communication via EtherCAT G for packaging machinery during the trade show, which runs September 23 – 25, 2019, and is expected to draw 30,000 attendees.

The GO-5100MP-PGE is equipped with a standard GigE Vision interface and, just like JAI’s GO-5100MP-USB with a USB3 Vision interface, the camera is built around Sony’s IMX250MZR polarized CMOS image sensor.

The 1 micron resolution HCDS-051-032-013-01-B1-01 Voice Coil Stage features cross roller linear bearings whereas the 30 micron HCDS-051-032-013-01-B1-30 Voice Coil Stage uses linear ball bearings.

The dual encoders are incorporated in essentially the same package size as the FHA-C mini single incremental encoder version. The dual absolute encoder offers single turn absolute position at the output, without the need for battery back-up.

The TEL10 series of 10 watt DC/DC converters in the DIP-16 package measure 0.94 x 0.54 x 0.31”, and the series is designed for 10 watt power density with 3.83 W/cm3.