The MPFM 2600 is part of the scalable Roxar Multiphase Meter product family built on measurement principles used in over 1,500 meter installations worldwide, and enables shale operators to monitor the flow from the well stream continuously and in real-time.

The Sinamics V20 I/O extension module is mounted on the converter using Plug & Play technology, and provides two additional input and output interfaces, each for 400 volts., designed to increase both the flexibility and the scope of the Sinamics V20.

Working together, the Flow Meter and Totalizer can measure, locally display and wirelessly transmit intelligent flow data to a Gateway for remote monitoring and control on a PC, PLC or other control system.

The FS10i Flow Switch/Monitor operates over a flow range in air/gas from .25 FPS to 400 SFPS [0,076 MPS to 122 MPS] and in water from 0.01 FPS to 0.5 FPS [0,003 MPS to 0,15 MPS]. Repeatability: ±0.5% of reading.

These valves are designed to Class 800 and provide tight shutoff, suitable for steam, condensate and other liquid systems. They are available in NPT and SW versions, in sizes from ½” to 2”, in either forged carbon steel or forged stainless steel.

FCI’s inline FLT93L Flow Switch is a thermal dispersion flow/level/temperature switch that was designed based on FCI’s more than 50 years of flow/level/temperature switch applications experience

Nordson ASYMTEK's 2-in-1 dispensing system and inspection kit provides process control for consistently jetting small volumes as low as 1 nanoliter at frequencies up to 1000 Hz.

Typical uses of the WM-NLCH flow meter include residential and commercial metering and sub-metering applications that use hot water: industrial food, beverage & plant process water usage, industrial laundry, industrial baking, cement mixing, apartment/condo complexes.

The family of modular S80-T80 Liquid Analyzers from Electro-Chemical Devices (ECD) is designed to provide engineers and managers with the process data they need to obtain and maintain a wide range of global, regional and local quality, environmental, safety and other certifications.

The expanded G3 and 580 Series platforms feature process control architecture that permits the design engineer or end-use specifier to optimize the size of the control cabinet for the number of required valves.

Designed specifically for flow measurement in round pipes or stacks of 12 inches [300 mm] and larger diameter, and square or rectangular ducts with cross sectional area of 100 inches [250mm] and larger, the model ST102A Flow Meter and the new MT100 Series Flow Meters from Fluid Components International (FCI) provide two to eight non-clogging, no moving parts sensing points.

The IP68 fiber plugs and IP68 fiber receptacles offer 400lb pull strength and 450lb crush resistance as well as protection from moisture, liquid and dust.

Red/green zone dial-face adjustability allows a unified visual warning system to be applied across a range of processes for quicker recognition of issues. Festo designed these new gauges to be visible and easily understood.

LIQUI-VIEW Base instruments offer a solution for monitoring the flow or consumption of cleaning water, cooling water or spa water.

The functionality of the B3100 flow monitor is designed for use with automated systems in remote locations, such as monitoring of meters in oil fields.

This direct drive motor can be integrated into a valve assembly for thermostat control as well as fuel metering, air intake shut off, fuel shut off, or air start control applications.

The 18 mm, modular 502 Series is a general purpose industrial valve for automation and piloting applications in the automotive and tire, food and beverage, pharmaceutical, and packaging machinery industries. The valve meets the ISO 15407-2 standard.

Typical applications for the low-flow liquid flow meters and controllers can be found in Food, Beverage & Pharma (e.g. additives, sterilization), Medical and Chemical (e.g. catalysts, reagents) and many other markets which require precision fluid handling e.g. fuel consumption measurement and dosing of colorants or lubricants in many industries.

Q.Sonicmax’s design features the first eight-path ultrasonic meter to combine both reflective and direct paths. This enables Q.Sonicmax to detect and correct for disturbances in the gas flow caused by short inlets, extenders, reducers, manifolds, elbows and a range of other piping elements common in natural gas plants.

FCI’s MT100 Series Air/Gas Flow Meters provide temperature-compensated direct mass flow measurement of air and gases for repeatable measurement in large diameter pipes, stacks and rectangular duct installations