-
ISA provides technical resources and standards to help industrial automation professionals advance their careers and the field. We enable automation professionals worldwide to solve problems and enhance their skills by bringing people together to create new technologies and share best practices with future automation professionals.-
ISA Resources
-
Upcoming Events
-
Industry Insights
-
Consortia
-
Industry Products
Featured Products
Scroll down to search for more products...
-
Smooth. Seamless. Smart. Meet GOT3000.
Faster startup, clearer visuals, built in OPC UA and VPN. GOT3000 HMIs help reduce downtime and simplify smart factory integration. -
2026 State of Industrial AI Report for Manufacturing
Cisco's 2026 State of Industrial AI Report, surveying 350+ manufacturing professionals across 19 countries, explores how firms adopt AI, secure networks and scale operations.
2,669 Products
-
Galil Motion Control introduces EDD-3701x EtherCAT slave drive
The EDD-3701x can interface with Galil masters (DMC-500x0 and DMC-52xx0) for sophisticated applications or with TwinCAT for simple applications -
POSITAL announces connection caps for IXARC magnetic encoders
IXARC magnetic absolute encoders with CANopen interfaces are designed for motion control applications that range from cranes and container ports to classic factory automation. -
Nanotec introduces PD2-C-IP brushless DC servo motor
The PD2-C-IP is available as a brushless DC motor, with an operating voltage of 12-48 V and a rated power of 105 W, and as a stepper motor with a nominal torque of up to 0.5 Nm. -
TRACO POWER releases THM 20 family of medical 20 Watt DC/DC converters
The THM 20 series are a solution not only for medical equipment but also for ITE applications such as transportation, control & measurement or IGBT drivers. -
PI introduces L-417 and V-417 linear stages
Applications for both include high demands on dynamics, precision, smooth scan motion, short settling times, and low tracking error, such as laser cutting, scanning, digital printing, electronics assembly and inspection, AOI (Automatic Optical Inspection), automation, and flat panel manufacturing. -
NewTek Sensor Solutions introduces HT-1000 series of linear position sensors
The HT-1000 LVDTs provide a ratiometric output for reduced thermal error . In addition to offering linearity of ±0.5% of full range, the HT-1000 AC-LVDTs offers mechanical and electrical life as well as the absence of friction and contact between the core and coil. -
Opto 22 announces release of PAC Project Software Suite R10
This release supports the groov EPIC system, adds eight control commands, and provides the ability to designate individual I/O and variable tags as Public Access for read-only or read-write use in IIoT data communications via MQTT/Sparkplug. -
Rockwell Automation releases Allen-Bradley PowerFlex 6000 medium voltage drives with sensorless vector control
The SVC addition brings heavy-duty ratings to PowerFlex 6000 drives in the 0-200-amp range, already available for the 200-amp and above range. It provides constant torque capability without the need for an encoder. -
Portescap announces 30ECT slotless DC motor
The 30ECTs are a choice for applications such as battery-operated hand tools, including industrial tightening devices and drills, factory automation equipment such as electric grippers, humanoid robots and automation actuators and for applications where there are diameter constraints. -
Applied Motion Products announces STRAC2 and STRAC8 Stepper Drives
Like their DC-powered counterparts, STRAC Stepper Drives feature microstepping performance and current control with anti-resonance. Units operate on AC supply voltages of 90 to 240 VAC and wire directly to 120 or 220 VAC line voltages to eliminate DC power supply requirements. -
Optimal Engineering Systems announces AU200-50x50-SC Alignment Stage
The linear travel of the X and Y axes is 50 mm x 50mm, and the resolution of each axis is 5microns(non-micro-step) or 0.125microns (with 20 micro-steps per step motor driver in use), repeatability is 1.5microns, and positional accuracy is 5microns. -
Enerpac releases Double-Acting Lock Nut Cylinder
The lock nut cylinders are designed to withstand up to ten percent side-load of maximum capacity and include an integrated tilt saddle allowing up to five degrees of misalignment. -
Aventics announces RTC-SB rodless cylinder
The RTC-SB rodless cylinder is designed for a maximum speed of 6.5 m/s (21.3 ft./s). The maximum stroke is around 6,000mm (21.6 ft.). A magnetically attached exterior strip, scraper and sealing strip protect the cylinder from dust and dirt. -
Pentek announces Talon RTR 255x series product line for serial data streams.
Optimized for SWaP (size, weight and power), the Pentek Talon RTR SFF product line measures 5.25" H x 8.5" W x 14" D and weighing 17 pounds. This series is capable of sustained real-time recording speeds up to 4 GB/s and can hold up to 30.7 TB of removable SSD storage. -
JVL releases MIS171-MIS176 models of ServoStep integrated stepper motor series
The ServoStep integrated stepper motor series MIS171 to MIS176 have a NEMA 17 42x42 mm flange and include controller with 6 different industrial Ethernet protocols, absolute multiturn encoder, closed loop and M12 connectors. -
Siemens adds AH90 and AH225 shaft heights to line of Simotics synchronous-reluctance motors
The motors are available in a power range of 0.55 to 45 kilowatts (kW), and also with rated speeds of 1500 and 3000 revolutions per min-1. In conjunction with the recently launched Sinamics Reluctance Control License, encoderless closed-loop torque control is possible down to a standstill. -
ABB introduces VD4 Digitup solution to digitize existing switchgear
VD4 Digitup is accomplished by using vacuum VD4 breakers with onboard current and voltage sensors connected to Relion protection and control relays enabling IEC 61850 digital communication. -
igus announces ReBeL 6-axis robotic joint
The joint is driven by a strain wave gear and will be displayed as a single component for the first time. The joint includes brushless direct-current motors instead of stepper motors as in previous robolink models. -
Bosch Rexroth announces the latest version of the Linear Motion Designer
The update is designed to enhance user guidance, databases and additional calculations for the dimensioning of Rail Systems and Screw Drives. -
Bedrock Automation announces the Bedrock OSA Remote
The Bedrock OSA Remote integrates cyber security, universal I/O, open connectivity, free engineering software, broad temperature operating range and sheer computing power into a standalone module for remote monitoring and control applications
