The sensors are available in an M12, M18, or M30 design. Flush installation provided, the nominal switching distances are 2 mm, 5 mm, and 10 mm, depending on the design.

These sensors are designed for industrial, medical and off-highway vehicle applications with an operating temperature range of -40 to +125°C and immunity to emissions –meeting or exceeding five EN 55022 and EN 61000 standards.

The cameras are equipped with a standard USB3 Vision interface capable of running at 23.4 frames per second for 8-bit monochrome or raw Bayer images at full resolution (4112 x 3008 for monochrome and 4088 x 3000 for color). Power and triggering can be supplied via a separate 12-pin connector.

Safe Portal Solutions from SICK ensure safeguarding for automated material transfer stations. Operating with up to four simultaneous protective fields, two vertically installed safety laser scanners detect people gaining unauthorized access of any kind.

The modules feature a metallic plate for functional grounding; 4-pole and 5-pole power connector versions; Ultra-Lock M12 connectors; an IP67 seal; eight digital channels; four motor drive roller channels; diagnostic LEDs; three rotary switches; a two-port Ethernet switch; an Ethernet metallic plate to allow both ODVA and PI grounding strategies; and Ethernet fieldbus connectivity.

The three I/O modules can be used as controllers for the direct execution of customer-specific safety projects. A special feature is their communication capability.

The GL4 uses interpolation electronics to provide up to 26-bits of effective resolution while onboard real-time 2D calibration ensures accurate beam placement over the entire field of view.

Typical applications include aerospace, automation, autonomous vehicles, high-speed communications, industrial controls, LIDAR, medical, material and chemical analysis, security, and wearables, among others.

Together with an additional, external temperature sensor, the EE1950 allows for calculation of the relative humidity. It is therefore a solution for climatic chamber control.

The controller includes optically isolated I/O, outputs capable of driving brakes or relays, and analog inputs for interfacing to analog sensors. The DMC-40x0 controller and drive unit accepts power from a single 20-80 VDC source.

This device is a safe scanner that combines safety technology and measurement value output in a single device. This enables safeguarding and navigation of AGVs.

The Simatic RF615R comes with a design of 133 x 155 x 45 millimeters, an internal, circularly polarized antenna and an additional external antenna connection.

Launching as the Schneider Electric Legacy Relay Offer, this full line provides a range of relay solutions to meet customer needs across applications and industries

The FWA8708 delivers I/O connectivity and expansion. It offers two PCIe and a Mini PCIe slot for high density PCIe payloads and an M.2 expansion slot to interface with SATA 3.0 and PCIe x4 bus for high data throughput.

The four X-and-Theta stages in this series feature linear travels of: 15 mm (0.591 in.), 30 mm (1.181 in.), 50 mm (1.968 in.) and 75 mm (2.953 in.), and the rotary table, capable of continuous 360O rotation in either direction, measures 100 mm (3.937 in.) in diameter.

With bandwidth from 70MHz to 350MHz, 8GSa/sec sample rate, 500,000 wfms/sec waveform capture rate, and up to 200M Record Length, the MSO5000 Series delivers system performance, signal resolution and memory depth.

Balluff's family of proximity sensors are designed and tested to provide non-contact object detection in ambient temperatures up to 230 °C/446 °F. This level of protection is required for hot metal stamping, glass manufacturing, steel and aluminum manufacturing, steel forging, steam curing, and other high-temp processes.

Due to the housing construction made of V4A stainless steel (1.4404) with a roughness depth of 0.6μm, the P53 STEEL HEAD is well suited for use in harsh environments such as dust, moisture and water vapor.

Designed for use on any AW-Lake Gear or Turbine Flow Meter, the FAC-S produces a scalable voltage or current output for download to a PLC or other control system.

The NanEyeM is also available in surface-mount chip form. The NanEyeXS and NanEyeM image sensors will be available for sampling in January 2019.