Common applications for the RCN 6000 encoders are large-scale rotary tables and radio telescopes which can adapt their design to the encoder while the integrated stator coupling ensures alignment of the components involved in the scanning process, even if there are deviations in the shaft coupling.

The “469” series model, which enables manufacturers to cater for dynamic strain application.

The NanEyeM features a custom multi-element lens which improves the effective resolution of the sensor. The MTF (Modulation Transfer Function) is >50% in the corners, distortion is <15% and color aberration is <1Px.

This package inspection/weighing machine has top/bottom package inspection of header/side seals, printed variable data, package height inspection and check weighing in one footprint.

The EE660 is suitable for measurement of low air velocity down to 0.15 m/s (30 ft/min). It features an E+E hot film sensing element. Furthermore, the sensing element is resistant to contamination and has a low angular dependency.

The camera variations include both standard JAI green housings, as well as special white housings for systems intended for hospitals, or clinical/laboratory environments where white housings are often preferred.

The DSC613 family is a single-chip solution that integrates a MEMS resonator and two low-power Phase-Locked Loops (PLLs) into a 6-pin DFN package as small as 1.6 mm x 1.2 mm.

A feature of the 3rd generation Sony Pregius CMOS global shutter sensors is a Dual ADC mode where each pixel can be read out with two different gains. The PL-D757 and PL-D753 take advantage of this sensor feature by combining the dual ADC images into a single hybrid HDR image directly on camera, thus removing the need for any host processing.

Steering wheels can be mounted directly to the SWS and connected to a CAN bus. For drivers, the SWS delivers a steering feeling from its no stick-slip, no wear, integrated magnetic friction system.

The improved accuracy specification is 0.01% of reading from 30% to 100% FS. Additel offers a variety of ranges with the improved specification for both controllers and pressure modules

The XR3 can control any combination of brushless, DC brush, or stepper motors at up to 320 VDC operating voltage and 30 A peak current capability.

FCI’s thermal flow meters with HART communications support the production of food and beverages, chemicals, electric power generation, mining and metals, pharmaceuticals, pulp and paper, oil/gas production and refining, pollution monitoring, solid waste, water/wastewater treatment and more.

The M8 cable connectors are available with male or female cable connector, moulded, with cable lengths of 2m and 5m. They have an IP67 protection rating, 3 A current rating and 30 V voltage rating.

The RD-19231 series operates in temperatures ranging from -40° C to +85° C, and is suitable for aerospace, industrial, and commercial position applications, including servo motor controls, antenna positioning, aircraft position feedback systems, machine tool and robotic positioning controls, and manufacturing process control systems.

The Simocode pro motor management system monitors, protects and controls constant-speed motors, and is equipped with predictive maintenance functions.

A MR430 Absolute Encoder System consists of the MR430-1 DIN Rail Mount Controller and MR431 Rotary Sensor. The Controller offers a number of built-in interfaces for ease of insertion in the engineer’s design – including SSI, RS485/Modbus RTU, Digital Set Point, and programmable 4-20mA and ±10V analog outputs.

The load cell with signal conditioner (100 N capacity, 1 N resolution) allows for 1-100 N of push/pull force feedback. It comes supplied with a recirculating ball linear bearing.

Matrox Professional Services offer in-depth support to customers, helping to recommend best methods and practices, and guide customers through their vision project development.

The stainless steel sensing face fights failure from impact, abrasion, and erosion while Factor 1 technology extends the sensing range to 8mm, even when flush-mounted in metal, for additional mechanical protection.

The reader has a variety of interface solutions for integration into existing systems. The RS-232 COM interface is a serial port suited for connection to monitors, POS terminals, measuring instruments, or printers.