Q45H/65 Residual Chlorine Dioxide Monitor performs monitoring and control of industrial disinfection systems in water, food processing and beverage plants. It responds to chlorine dioxide with minimal interference from residual chlorine. A pH sensor can be used to allow the monitor to display both chlorine dioxide and pH measurements.

Convir Pyropen handheld infrared thermometers can measure temperatures from -20ºC to 500ºC (-4ºF to 932ºF). Measurements are made with accuracy up to ±1ºC (±2ºF).

The system allows unattended, automatic exchange of pallets in seconds at most 5-axis vertical and/or 400 mm horizontal machining centers. Its modular design fits virtually all machines, including those with a built in trunion type table.

M-RPC pallet systems improve productivity by allowing quick change over of parts or fixtures at a variety of applications, including virtually all types 4th and 5th axis rotary tables, milling machines, lathes, EDM and other machines.

iChipSec CO2128 secure Internet Protocol communication controller chip for IP-enabled machine-to-machine (M2M) applications works as a coprocessor that offloads IP and network security protocols from the host processor. Security features include a random number generator, secure hash accelerator, encryption accelerator, and WEP/WPA2 encryption for WiFi.

Grace Technologies is pleased to announce the new ChekVolt allows users to test for absence of voltage and provides voltage presence LED indication; all without opening enclosure doors.

AEP-A2000R Series 2KVA pure sine wave inverter is packaged in a slim, 1U rackmount design. It delivers clean output power for powering sensitive loads and for improving AC equipment performance.

EQuan Environmental Quantitation System coupled with the TSQ Quantum triple quadrupole mass spectrometer is a turnkey system for the analysis of pesticides, herbicides, antimicrobials and pharmaceuticals in environmental and drinking water samples.

MEN single-stage, end-suction pumps deliver maximum mechanical and hydraulic flexibility, and are ruggedly designed to provide reliable performance in a variety of water services. These areas include water supply, water treatment, irrigation, drainage, filter cleaning, water circulation and HVAC.

IDENT Control RFID product identification and data collection solution is now available as a 13.56 MHz (HF) system. This transmission frequency enables more data to be transmitted faster making it possible to read large amounts of data on the fly. The system supports DeviceNet, Ethernet, and PROFIBUS protocols, as well as RS232 serial communication.

IV7C can read RFID tags anywhere within reach of a forklift. It can be configured to read multiple air interface protocols in mixed populations of tags, including EPC UHF Generation 2 (Gen 2) and ISO 18000-6b and 6c. It is both ETSI and FCC certified and RoHS compliant.

WLD Series of wireless LonWork devices provide a reliable low-cost alternative to long runs of LonBus for establishing communications to previously unreachable locations, due to the lack of existing communications architecture.

HP2008 hinge-operated safety interlock switches are suited for use on smaller guard doors. The switches are available in solid or hollow shaft versions and provide force guided contacts with tamper-resistant operation. A NEMA 6 enclosure enables them to withstand water washdown cleaning while providing a minimum of four million actuations

SCM WM 9.0 focuses on efficiency inside the warehouse with support for RF, voice, wave planning, cross docking and labor reporting. Outside the warehouse, the solution creates value by extending capabilities including Yard Management, Event Management, Performance Management, Transportation and Logistics, and RFID.

The switch supports up to eight 1 GB ports in a compact 1U rack-mount switch. The switches can manage both high priority streaming traffic, such as security cameras, VoIP, and identity scanners, and the bursty data traffic typical of manufacturing operations.

Data Distribution Service allows distributed applications to simultaneously support both IPv6 and the current-generation IPv4, easing migration to the newer standard. IPv6 support is required of all U.S. Department of Defense networks and applications starting in 2008, making it essential for engineers to begin adoption of this wide-ranging standard.

Edgeware enables enterprises to drive real-time supply chain execution. It configures multiple sensor devices to provide a representation of the physical process. Sensors include RFID, GPS location, proximity, vision, environmental, and biological.

Building security system uses the IP environment for applications ranging from intercom to door entry. It includes Annuncicom-100 IP intercom devices and Defconlock access controllers, which communicate over Ethernet.

The BIMETAL Dual-Mode Remote Thermometer provides on-site indication of process temperature conditions, and simultaneously provides a mV or ohm signal proportional to temperature for input to a transmitter, Remote Terminal Unit (RTU), controller, recorder, indicator, PLC, DCS or SCADA system.

Modular MC600 six-Channel Controller provides continuous gas monitoring when equipped with gas sensors/transmitters. It has dual redundant Modbus communications, Type 4X housing, and an optional onboard 115/230 VAC power supply that provides Class I, Division 2 classification.