Industry Products

Expansion modules snap onto the side of any BRX Micro PLC Unit (MPU) or BRX Remote I/O controller, creating a sturdy and rugged PLC platform.

The two variations — the BOD002M with a 50 to 100 mm working distance and a resolution down to 10 μm, and the BOD002N with a 50 to 650 mm working distance and a resolution down to 100 μm — combine the output modes of three previous models into one.

The series of metal face proximity sensors is designed to withstand the harsh conditions of typical automotive welding processes with a fluororesin coating that provides increased spatter resistance.

These sensors are suited to a range of applications including Augmented and Virtual Reality (AR/VR), Simultaneous Localization and Mapping (SLAM), and 3D scanning.

This design allows for a motors with minimal cross section diameter of up to 1.20 inches [30.5 mm], and strokes up to 0.60" [15.2 mm] stroke; this size generates up to 1.12 lbs [5.0 N] of continuous force and 3.36 lbs [15 N] of peak force.

Mounted on meters including AW-Lake Gear Meters and Turbine Flow Meters, the EDGE Flow Sensor outputs a frequency, current or analog signal that gives users more installation flexibility, especially when unsure of readout equipment or a control room interface.

The Model 205 H2S in Crude Oil Analyzer replaces manual grab sampling for lab analysis

The M8 connector is designed for use in applications including: factory automation, control systems, and electrical equipment requiring IP67 protection.

A camera in FLIR Systems’ optical gas imaging (OGI) series, the connected GF77a provides upstream and midstream gas processors, producers, and operators with the ability to monitor continuously for invisible, potentially dangerous methane leaks at natural gas power plants, renewable energy production facilities, industrial plants, and other locations along a natural gas supply chain.

LP-22 series potentiometers are constructed to satisfy applications like robotic control, X-Y table feedback, injection molding machine slides, press or die arm position, control valve shaft position, and mil/aero test stands.

MARK Display brings essential information right where front-line workers in the supply chain need it most: the back of the hand.

The No Drip Internal Mix Atomizing Spray Nozzles work in the same way our standard atomizing nozzles do, but have the added benefit of positively stopping liquid flow when compressed air is shut off.

Offered in both polarization maintaining and single mode fiber variants, these lasers can be optimized for wavelength tuning by temperature or current depending on the application.

This registration ensures that all WirelessHART users will be able to add Vanguard device drivers the next time they update their device descriptor (DD) libraries. It also assures users that they can add Vanguard systems to existing WirelessHART networks.

The Koganei lineup of Cell Master all-purpose robots is designed to fit a variety of applications from industrial to workshops and hobbies.

The beacons are based on the Nordic Semiconductor nRF52832 SoC and measure a 40.0 x 31.0 x 12.0 mm within a gray, plain housing, adaptable for many applications.

The congatec Embedded Vision Platform is designed for embedded vision applications such as automated checkout systems in retail, surveillance and access control systems in facility management, industrial inspection systems for quality assurance, augmented reality for maintenance, and image processing in mobile and portable medical technology.

The encoders can satisfy needs in a range of industries, including entertainment, material handling, mining and automotive manufacturing.

The WIN5 works with load cells in weighing measurement systems and is designed for simple industrial applications.

The unit supports a range of resistance welding technologies, including AC, DC inverter, AC inverter, transistor, and capacitive discharge. Featuring a user interface and color touch panel display, the MM-410A provides information on current, voltage, weld time, and force.